Dear Experts,
I am working on cnc lathe equipped with fanuc oi-tf controller with C axis. My machine showed low battery alarm and I replaced the batteries while machie was OFF which is totally...
Type: Posts; User: machining214
Dear Experts,
I am working on cnc lathe equipped with fanuc oi-tf controller with C axis. My machine showed low battery alarm and I replaced the batteries while machie was OFF which is totally...
i dont know exactly what you are asking about. At first machine was giving APC alarms for battery low signals. so i changed the battery located on fanuc drive in the backside of machine.
hi... i am facing the same problem like your . although its been long but hope if you check my msg can be of help to me.
thanks
dear friends.,., i just changed batteries of my cnc lathe . after replacement machine is giving A7.7( Alarm from turret controls EX1077) and A10.7 ( Tooling not orientation EX 1107). I need guidance...
dear friends.,., i just changed batteries of my cnc lathe . after replacement machine is giving A7.7( Alarm from turret controls EX1077) and A10.7 ( Tooling not orientation EX 1107). I need guidance...
Thanks for replying...its drum type tool changer..How to check interlocks?
Thanks for reply... can you please share your email id so that i can send you video...i tried but i cant share that video here. its size is 571KB mp4 format
...
Thanks milling-man for the reply. in fact M79 is executed and unclamps occurs.. but when G28 Z0 is executed the program hangs. What i understand is on G28 Z0; spindle should go to Z0 so atc brings...
Dear All...My vertical machining center had lost all parameters and macro programs. i restored all the parameters but right now unable to find right macro for tool change. my machine uses M79 for...
@Basham..check the macro if model is O-MD
Hi everyone...atlast im able to write above macro O9001 for atc. the problem is when "program reaches unclamp position it stucks over there and alarm signals about improper macro". The macro in above...
today i found a operation manual of this machine and at the end this macro program was written.
i tried to create progm after changing par. 10 bit 4 to 1 ,but got illegal program function. i also change para 240 to 6 as well but no success.
I also tried to create prog with O9000,O9001,O9002...
Hi Stevo...I am also facing the same tool change problem with my fanuc O-MD. .Its umbrella type atc ..Parameters 230-239 along with 240-242 all are zero but parameter 40 bit 5 is 1. while i use M06...
MTB not replying
my machine atc is umbrella type 16 tools atc...
i went through few posts over here and checked that my parameter 230-239 are zero and parameter 40 bit 5 is 1... further more i cant find programs like 09000 or O9001. When i tried to enter a macro...
@zavateandu...thanks dear. The machine manufacturer is Sunlike Machine Tools Corp. Taiwan. Its Model is PV 500,vertical machining center. Controller is FANUC O-MD.
HI EVERY ONE....
AS IM A NEW ONE IN CNC MACHINING IM FACING LOTS OF PROBLEMS.HERE I COME WITH A NEW PROBLEM. MY FANUC O-MD CONTROLLER, CNC MILLING LOST IT PARAMETERS. I RECOVERED ALMOST ALL BUT I...
������������...Thanks for training but it hurts...lolz
I traced the cable which supplies 24 v dc to main panel and it was found that cable was cut thats why supply was disconned to main panel....
One thing i found in this forum that no one dares to...
God Help thos who help themselves...i have traced the wire which came to main panel and it was found that cable was cut by some means...the problem was faulty cable...
hurraaahhh
I have fanuc OM-D controlled 3 axis cnc milling. My problem is about control panel switches which are not working except ON/OFF and Emergency stop button. I have checked and found that 24V are not...
many thanks for kind reply...machine is in ready position but stuck in zero return mode. The problem is, modes of the machine are not changing and as i have mentioned operator panel lights are also...
Thanks for replying..infact lights are not working on panel nor showing any "NOT READY" indication on screen. Machine is stuck in zero return mode. today an electrician came and told me that 18vdc...
I have a fanuc o-md controller on my cnc milling. Machine shown z-axis overtravel alarm , O/T release button was also not working . I manually travelled z-axis by moving lead screw. O/T alarm...
Thanks for your reply. i have soft copy of operators manual but cant find the solution. Infact this machine builder is PROMPT from Taiwan. Its slant bed cnc lathe with C axis. controller is fanuc...
Hi...im new in lathe machining. just bought a cnc lathe fanuc oi-tb with live tooling. i need to know which software will be worth learning. i have problem with activating live tooling as their...
I just got cnc lathe equipped with fanuc oi-tb. infact im from milling background and right now unable to activate live tooling either axial or radial. i tried to contact supplier but he is not...
Thanks @memory man... i had the same problem for fanuc o md, following your instruction changed par 901 bit 6 for interface ...my problem solved....Really thankful...