Search:

Check the brushes it worked for us.

Is there a way to copy my post and macro files off my main computer and copy to my laptop?

My 4020 chiller unit is not working. I checked the voltage and the plug shows 114 v but it does not turn on, but if I plug it into a regular plug it works. Could it be the transformer? I checked the...

How do you get the display to show tool paths on cnc88?

All american cnc 714 974 0820 Haas does my repairs his cell # is 714 862-5121 He does repairs for many of my friends.

My 3016 with CNC88 HS turns on does cold start ,mdi works but if I push the jog button, it will not jog on any axis and the display freezes and I cannot exit.Any ideas what it might be?

BTW
my ps that failed(looks like a PC type)said 5+vdc 25.0 AMP.+12vdc 10.0 AMP,-12vdc 0.3 AMP

If you dont jump those 2 pins the power supply does not work

You can make the relay work by putting 1 leg of 110V in on each of the 2 pins spread about 3/8" apart(like the black 110 on one and the black power supply on the other)put the 2 wires coming from...

The blue goes to 12v-,2 yellows go to12V+, the 2 reds go to 5v + ,the 4 blacks go to gnd ,the small green and black on the large connector get connected I think they are pins 3+14.Bundling the wires...

Sorry 500 watt its been a long day.

I just looked at my power supply, if you hook a atx 50 watt to the output wires(Iwould disconect from old board) then put a toggle switch in the 110v input,after turning on power wait 30 sec then...

It might be ok seeing as that when they fail they dont put out enough power and the machine doesn't work. But there is a relay on the board that is powered by the power up button , so power is not...

If you have the power supply that looks like one out of a computer you can buy one for a computer (make sure it has enough watts) then go on the web and find atx wiring diagrams. You have to bundle...

My 4020 did the same thing .I tried changing relays and about everything else. I t ended up being the power supply. I could get close to 5v but it must have been not enough>

On my 4020 only when cold after start up I try to do a cold start and the s key does'nt work. Also a few other keys around the s don't work.If I heat the board on the back it seems to work.Also today...

Any comments on milling small parts and taping 1/4-28 with A286?

Any one made parts with A286 stainless?

Has any body had any experience cutting parts made of A286?

What is the procedure for blocking spindle and counter weight when moving machine?

What would be a good warm up program for a VMC 4020.

Where can you get a small deionizer?

When warming up spindle ,after a few minutes the spindle shuts off and coasts to a stop.I recall the alarm says regan overload.Any ideas? It doesn't do it all the time.

I had the same problem with Bobcad. It ended up being the IGES file. The designer changed something to do with the surface and it worked perfect.

It was the power supply. I had a spare and was amazed how different the machine sounded on start up.It also seems to run better. I think it has been going bad for a while.

It has 110 to board but I can not get 5v or12v,but my other machine is the same way until I push start button.

My 3016 powers on but when the power up button is pushed nothing happens. I tried replacing the ss relays.Somtimes it will start after tuning on and off a couple of times.As far as the power supply...

When generating tool path in solids kind of the shape of a half of an egg,is there a way to make the surface smoother in the cam? Now it is chopped up because each segment is about .100 to.150. Ineed...

It has Quadro FX 500/FX600 128 mb mem.Also it runs auto cad and inventor just fine.My computer was custom made for what I do.

It is a pentium 4 320ghz 2 gb ram, HP photosmart 1115 printer