Hi, I read your post, I just bought two old fanuc robots and I'm also interested on using mach3 to run them they're six axis and S-400 model (pretty old) how did you comunicate with tha servo...
Type: Posts; User: jamesbond007
Hi, I read your post, I just bought two old fanuc robots and I'm also interested on using mach3 to run them they're six axis and S-400 model (pretty old) how did you comunicate with tha servo...
Hi, The guys from Techno forgot about my problem, I haven't get any information regarding how to connect this to a Sted/dir signal from my parallel port using mach3, will try today what Montabelli...
Here is the final configuration I used, It worked for me at least on the desk top right now, I'm still missing some linear rails for my X axis so I haven't finished the machine yet.
Controller...
Hi, I got it up and running all three axis now, I'll post pictures and maybe a video later, the connection was a little tricky and more a trial and error thing, the configuration was tricky also but...
Hi, I'm trying to get this Yaskawa Drivers and Servos to work with Mach3, I have built other cnc Machines but with steppers, Drivers are SGDH-04AE, and servos are SGMAH-04AAF41, so theyre a match.
I...
Hi Chris, here are the pics of one Stepper Controller, there is no Labels on the aluminium case so I took it apart and there is some numbers in the back of the PCB behind the toroidal transformer, on...
Thanks Chris for your reply, I have no problem connecting the steppers, the problem is with the Stepper Controller or Stepper Driver, I need to know how this C-Series controllers can receive the...
Hi, I was speaking with bob Cardone, but he sent me a manual for all the C-Series controllers and the other motion controller the one that controls the drivers I think is named 4.0 and 5.0 controller...
you're right Montabelli, thanks a lot for your comment, I did'n have that in mind, they're probably old controllers that don't have microstep, I want them for a small tabletop router that I'm...
Here is one... I have three of these drivers... Would be great If I can use them, as they have their own power supply I think.
Thanks for your reply...
Hi, does anyone know if it is possible to use some Isel Stepper Controllers and Stepper Motors with Mach3, I have a new build I'm doing and i'm planning to use mach3 so I need some info on how to...
Yes, they all happen whe doing the rapid moves, I haven't found any guide yet that says how to really adjust speed, I did some autoconfig of the axis from mach3 and it came out with a speed of 2500...
Hi, I've been busy doing great progress to my build, but I have a problem, I don't know what is it but its like I'm losing steps, the X axis (the main gantry movement) gets kind of stuck for a second...
This is the cabinet getting ready to be wired, I will use the same amphenol connectors the gantry came with...
Hi ya'll, it feels so good to finally being able to post my first CNC build, It can be considered a retrofit, since I'm taking a Junkyard found TechnoIsel 3 axis table (small table but I think good...
Hi LN-jet, your design looks really neat, its been almost three years since I joined the forum, and ever since I have looked very carefully for parts on the junkyards, I think this time it paid...
Hi mmcleod, your info is very helpful, I think I will go with Mach3 as I see its pretty well supported, I'll do the trial version first, I want to set this machine up to acumulate knowledge for...
Thanks again mmcleod, following your advice I will buy the G540 kit from keling, I took apart one of my servos and the have 5/16" plain round shaft, I guess I'll need to buy diferent couplers as the...
Thank you mmcleod, your info is very useful, I'm gonna order a 270 oz-in 3 axis kit with Geckos from Keling, Do you think I would need some adapter on this Nema 23 stepper to work with my current...
Hi to everyone, I just bought a Techno Isel Gantry Table I think is model 027 from a Junkyard, it looks that this table was used to apply some glue in some factory.
I want to use it as my first...
I no longer have this machine, it was sold before we had the time to fix it, Its someone else's problem now, I guess they got a good bargain, thanks a lot anyway...
That's it...
Thanks
They're very difficult to find, They are on their website but there is no link to them, Pm me and I can send them vía email to you.
Hi, we haven't been able to turn the screen on yet, this machine we don't use and that's why is no pryority to fix it, It has a CRT monitor.
Hi, I don't really now the rules for sure about posting live links so you can PM me and I'll help you find your manuals...
I found the manual's looking a little deep in Hurco's Website, thank you very much anyway
Best Regards
Hi, I'm also in the need for the operation manual for a Hurco Autobend 7 system, but the link posted below doesn't work anymore, anyone can help me find it?
Thanks in advance.
Hi everyone, we just bought an used Cincinnati 135 Ton brake press with an Hurco Autobend 7 backgauge control, they told me it was working fine before shipping to me and I notice the cable from the...
Hi, you were right, the backlight of the screen is failing, I'll bring a technician to see if he can fix it or replace it.
Thanks a lot.
Hi, I just bought a rebuilded Amada FBD-8025 Brake Press, it has 8-axis movement with a windows 3.11 based controller and touchscreen, after a few minutes of working fine, the touchscreen goes off,...