Search:

Hi.
I saw in some Youtube video how a guy enabled rigid tapping mode in a machining center (can't remember make or control),
and then he just used the handle control to move z axis and the spindle...

Thank you for the manual, I have now tried to do the orientation procedure by first unclamping the turret by pressing "spindle stop-select-feed hold", but nothing happens!
There is now "A-90" alarm...

Hi.

We are having serious problems with our lathe 2003 KIA SKT28. Control Fanuc OT-i
The machine worked fine, but all the sudden it showed turret alarm "AL-64 Turret index time over"!
Then when...

New discovered symptoms:
The machine gets error at de- or acceleration always only once after the use of C-axis. Once it has tilted, it works like a charm when de- or accelerating, until I lock and...

Hi everyone, could you guys help me because I'm having a lot of trouble with my vertical lathe! It is not even that old, but it has some problem with spindle encoder or positioning in general.

If...

Our "problem" was solved, it was caused by the sum of ignorance and misunderstanding.

The "2032 center position ng" alarm simply informed that the center pinion (or what do you call it) was not...

Hi!

We just bought a used Kia SKT lathe 2003 and we can not get the spindle working!

It worked fine before the transportation but now the spindle does not go into "ready" state. It has a Fanuc...

Doesn't work on 64-bit OS.

Hi.

Is there any autocad gurus here in Cnczone who would give some advices to a noob?

I have watched some tutorials from youtube but thats about all I know of cad softwares.

So I need to do...

The machine is now up and running! Turned out there wasn't anything really busted in the machine, the previous owner had just disconnected the rotating a-axis and this machine needs some kind of...

Could someone with similar milling center test their machines that is the main relay supposed to be connected and the power unit supposed to feed voltage to the crome bars, if the spindle amplifier...

Yes, I have checked all the connections and every single fuse I could find in the machine. I've also opened the power- and spindle module and inspected if there are any black burned spots in the...

It has its own ground, it is connected to the main grid via a 5-wire cable, 3 phases, zero and a ground. Also the phases are in correct order, and just in case I've tried to run the machine also with...

Still having the same problem... A couple of professionals have had a look at the machine but so far no progress.

I've studied the ladder diagrams and tried to find something that would cause the...

There are full voltage at the power buss when the main relay is manually pressed. But the relay does not connect by itself. But although there are power at all drives, the alarm still appears.

Hi everyone.

I have the same problem with my machining center. It has a Fanuc 0m control and the 401 servo alarm (VRDY OFF) message comes right at machine startup. I just bought the machine and...

BTW I got the data transfer thingy working, downloaded cadem free software and with Al's help the settings are now as they should. Also tried hyperterminal and it works also, but its a bit difficult...

Any news about the settings yet? I'd appreciate if someone could explain what parameters should i change, and also to what should the connection settings be set to.

Could you explain these settings, im not an expert with these things...

Ok thanks very much, i didn't realize I could use even hyperterminal for that...

But another problem, does anyone know what kind of com-port connection settings do I have to use for that fanuc...

Hi.

I have a problem with my lathe that has Fanuc 18-T control. The problem is that I have to have a computer for tranfering programs to lathe's memory and back, and now my computer is broken.. ...