I just want to thank every one for all their advice and help. Just want to let you guys know that the deal fell through on the CNC and I won't buying this machine. It's too bad because I think I...
Type: Posts; User: madmike46
I just want to thank every one for all their advice and help. Just want to let you guys know that the deal fell through on the CNC and I won't buying this machine. It's too bad because I think I...
Thanks for the info gwood. Looks like I will be the new owner of this machine in the new year. I have been running this machine part time for the last 3 years. It should have a few more good years...
Mike
The machine would be from the company I work for. They are shutting down manufacturing a the plant that I work in. I will be laid off in the new year and I am buying the Hawk 150. They...
Thanks for the offer Mike. I will keep you in mind for the future. I did find some fans, they were only 25mm thick instead of 38mm that the originals were.
These put out about 35 CFM's each, ...
Just a quick question, what happens when the battery on the real time board dies? Wouldn't you need to get the BIOS from Cincinatti? Or is this a problem?
I changed the battery this morning. Instead of writing every thing down I just used my digital camera and took pictures of each screen in the BIOS. Took more time to change the battery then it took...
I have a Hawk 150 Turning Center that the touch screen doesn't work on and I just use a mouse to get around. i think the price I was quoted was $1500 US, for that price I can use the mouse for a...
Thanks for the quick reply mallardfizz. I was wondering if you know how to find the number of hours a machine has, is there a screen that I can go too, to find this out, I know on Fanuc controllers...
Thanks for the replies. This morning when I booted up the machine it had me go into the bios and reset the time and date. I noticed that the time was off by about 4 hours yeserday. I went through...
How hard is the battery on mother board to change? Thanks for any help.
Mike
I have a Hawk 150 that I am running and I have been thinking about buying this machine, it is a 1998 model and I was wondering if there is anywhere that can tell me how many hours this machine would...
Thanks for the write up, I am working with a Hawk 150 right now which I may be purchasing in the near future. Machine's only issues are tool setter not working ( which isn't a big deal) and touch...
Talk to the guys at Macoser. Just recently had problems with a Hawk 150. They can probably e-mail you manuals if you need.
you may want to try e-mailing Siemens and they might supply you with the number that you need, as long as this option was originally purchased with the machine. You'll probably have to supply them...
I believe the floppy drive is part of an option package, and you need the purchased code that goes with the option.
Anyone out there have g-code and m-code lists for a Cincinnati Hawk 150 with A2100 controller. I have no programming manuals for this machine. When the machine arrived the quill on the tailstock was...
Can anyone out there help locate g-code and m-code list for this machine, it has an Acramatic A2100 controller. I haven't got all the manuals for this machine any help locating manuals would be...
I am starting to work with a cincinnati Hawk 150. This is a used machine and we don't have all the manuals for it. I was wondering if anyone could help me locate manuals for this machine. I will also...
I am starting to work with a cincinnati Hawk 150. This is a used machine and we don't have all the manuals for it. I was wondering if anyone could help me locate manuals for this machine. I will also...