That doesn’t work with your software -unfortunately- it’s too old!
From V3R10.0 the following works:
(example for a useful usage of the register)
G201H0
RG 01 = 10000.
RG 02 = 2000.
RG 03 =...
Type: Posts; User: cnc_bert
That doesn’t work with your software -unfortunately- it’s too old!
From V3R10.0 the following works:
(example for a useful usage of the register)
G201H0
RG 01 = 10000.
RG 02 = 2000.
RG 03 =...
Hello everyone
I need your support: I want to identify the current position of the drill hole with Cycle 421 automatically.
Imagine the reference point is the middle of X and Y and I have to...
Okay, I don’t know what that is but alright...
However when the insert breaks then of course I have to exchange it immediately not after 300 blocks.
Hope you can give me some advice!
Hello
As Kassi already said you have to press the PAUSE BUTTON- that’s the one next to the Hold button. Then the memory goes empty and after 20-50 blocks the NC will stop. So now you can run with...
Hello
I just thought about something else... have a look in the service under MAINT PROBE if the radius is entered there. If not then that means, that the sensing device is not calibrated. Then...
Hello
Check path C:FidiaWScca.dat.; in the CCA.dat you will find the minimum information.
For example:
5 Origin
10mm C1x
10mm C1y
100mm C2x
100mm C2y
3000mm Maximum Radius
10mm...
Hello,
Try the following: run with an offset the outline as a zero contour as an Nc program in the W-axis (CQA WP +50.). Not over the Isograph but over the CNC.
Meaning with EXCECUTE START...
You can mark the row and press F1 to see a command about the error message. It often doesn’t help though.
Log in at Service and than via Search convert the parameter ROTO_CQA with Enter-button.
It might work.
Greetings