Hi Steffen
I hope you did not spent too much money on it. As far as I know, the memory card 4022 226 3340
equipped with 1Mb only runs from a 10Mhz CPU hence from software version V600 onwards
I...
Type: Posts; User: mahoist
Hi Steffen
I hope you did not spent too much money on it. As far as I know, the memory card 4022 226 3340
equipped with 1Mb only runs from a 10Mhz CPU hence from software version V600 onwards
I...
Hello kesh,
If the switch looks like a domino stone, then it has the DMG order number 27068535.
It costs around 100€. I needed one last week and ordered it in Pfronten.
It arrived the next day...
Hello Uli,
The baud rate 7200 is unknown to me. A baud rate of 300,600,1200,2400,4800 or 9600 is standard.
Please tell us the software version (due to the parameters etc.) and maybe you can...
Hello Mikko
sorry for the late answer.
I’ve got them only in German :-(
Best regards
Mahoist
[attachment=6204:MC_9_432.pdf]
Hello Lars
Here you are :)
Greetings
Mahoist
Hello
E 171 means that the cabin door isn’t closed. Close it or check the position switch of the door.
By all means, you should find a list with all errors. We’re not always so fast ;)
...
Hello Roberto!
Take a look at the display when you press the key “Machine on”. You’ll see “88” and then another value after a couple of seconds. There’s a list of error messages in the connection...
Hello misiug
E109 means that 90° limit switch wasn’t reached.
It’s located on the round track midway of the tool changers.
Now it depends on if tool changer moves or not. If it doesn’t, then the...