Thank you OkumaWiz I will try when I finish the job.
Type: Posts; User: Mihail_
Thank you OkumaWiz I will try when I finish the job.
I don't know what does it mean.
I checked the soft limits first. Everything is fine. I needed to move ZB 8mm closer to main spindle. According to soft limits I could do that, but it wasn't move....
There are list of parameters related to spindles interference #50-#53. I believe some of them might solve my question.
Hi everybody)
Does any one know how to change interference between spindles using parameter?
OSP7000L, parameter long word #50 doesn't work. I changed parameter 50 to 40000 than add -40000. But...
Thank you OkumaWiz for help. But I didn't try to change any limits yet. I'm worry that something goes wrong. It looks everything is okay with the limit.
Main spindle with A turret limit ZA from...
May be upper turret should be in Z limit? Will try tomorrow.
There are two presseters on the right spindle.
One I use for lower turret.
How to use another one?
I try to switch W axis, or choose upper turret with right spindle but axis won't move, won't...
May be some one knows how to use tool presetter for A(upper) turret with right spindle?
Thank you all for help. Here is some video of running this machine https://youtu.be/7vLUuiI_u20
Hello,
Can somebody share the information about 4th axis?
Table size, servo amp., servo motor, and parameters for 4th axis.
It was easier than I expected.
So, here is instruction.
1. Need to check all E-stop buttons. They are all must be normally closed. p.75 E-stop on robot must be short PB503 and PG301.
2. After...
https://drive.google.com/file/d/1PDlM-3V68CI1AL6LJso4JjxWstc1w2L0/view?usp=sharing
Does anybody know how to clear alarm from robot servo amplifier? I need to disengage these axis.
Okay, does anybody have this specification?
I think there must be some algorithm.
So the way to disengage robot is to "say" it is ready for operation (jump some wires). I have all wires diagram. Robot is rooted to the machine initially. It has additional CPU board. I thought may...
It's 7000L.(1997y)
Hello everybody.
Does anybody know how to run the machine if the robot doesn't connected to it?
What we have now. E-stop was released, hydraulics works. Now we have BDU alarm and interlock alarm....
Hello
I have a problem with tool presetter on Cincinnati HAWK200. Circuit board inside this arm is dead due to moisture. I contacted with our local representative to buy new board. Our...
Hi everybody,
Could someone give me instruction how to activate F-keys on Mazak M2. I can't load hidden parameters.