Search:

Okay if there is a minimum depth of cut, what then is the maximum depth of cut?????

And why leave us all in the air? What circuit did you jumper?

Still need some help here.

Thanks

How to get it to read work shift or measure?
Could use manuals,
Thanks

How difficult is it to find work for one of them?

Does Okuma have any good recession sales happening?

The reason for all the enviro crap is to remove freedoms and things.
Also it is to keep minds busy and not worrying about important things like liberty which means being free from the enviro crap,...

There are some really good deals on machines now. I know of a place that got 3 new large machines for 250K, I think 48K is a bunch for a small machine in todays economy.
You could have shopped...

All CNC's will reset.
Haas restart will start at anyplace in the program. Really cool deal. If you have a problem you can number the lines and watch the graphics, and figure out where you want to...

I remember you could hold a combination of keys for an 18M control to access the main software. do any of the other models have this function as well? 21T , 15M, 6M etc. ????

You need to call Fanuc. They can head you the correct direction for the proper parameters. As far as macros, its been over 10 years since I did a tool setter macro.
As far as a tool changer there...

Servo motors, so how much reduction is normal to use these on large machines? And what kind of travel speeds would you get?

Well thats cool if it has a zero set button. Similar to Fanucs origin button????
I guess it has its deals to learn kinda like Mazak. Is it similar to Fanuc when reset, ie doesn't rewind the...

Part center is X0Y0
T1M6
G90G0G54
X2.3Y0.0
S200M3
G43H1Z2.0
G1Z-.125F100.0
X2.188F4.0
G2I-2.188
G1X2.3

I've only spent a few days on a hyundai and really like it, seems pretty accurate.
Has fanuc 21 .

Years ago I spent 2 days on an okuma control, and had asked one simple question and got some bs for it. On Fanuc's, Haas, Mazak, Yasnak etc.
If you desire to manually run it or just simple...

Rockwell 38 to 40 C scale, you don't want the whole rod case hardened. I'm not sure what the hardness for the needle bearings should be, you would want to just harden the
bearing surfaces.

660 bronze

On live tooling lathes? How to do it?
I'm a newby on cnc lathes and finally got to play with a brand new I think its a skt200. Have lots of mill time.

Also a quick program to show how to...

If your using some canned cycle of some sort it is usually called up with some G code?

Something is binding it. Unless maybe its over compensating like for backlash, I'm not sure just guessing.

wow it made a mess of what and how I typed it all.
the text is all goofed up and intermingled with the program sorry
I'll fix it when I get time.
%
:1234

G91G28Z0
G91G28X0Y0 <-- these...

Its a locked program. If its a Fanuc control there is a parameter to unlock the 9000 numbers.

Just some info to help if you ever have this problem.
If you use G10 lines to load work offsets, remember if you have a G91 before those lines it will add to what is already in the offset tables....

I've been told that all the fancy features that Fanuc charges for are already in the control and ready to go. You just pay to have them turned on. So does anyone know the tricks? I had a very sharp...

Hmm its been a while, but, I've done the M code deal and its not as hard as all make it sound here.
The manual will tell what 8000 or 9000 number you can use for the different number of G or M...

Thanks Dan, so there is no way to change the machine dimensions to read in inches?
Its a real pain to keep converting them, because the work coordinate system is in inches.

Example;
1 inch diameter hole, and a .5 endmill.

G1X.25
G03I-.25
G1X0

that will do the hole
This is with the center of the hole being X0 Y0.

How to questions here.

Change parameters? do you have to unlock like for 15M up?

This stupid thing reads Machine dimensions in metric, how to change it to fractional (inches)?

Thanks

I'm posting this for a friend, he's near seattle. He is looking for a Cincinnati
#4 or larger wide knee horizontal hopefully with a head. And newer than 1964.
With feed motor. Hard ways would be...

First Oz fires. Reason, they stopped the guys from clearing thousands of acres. I have a friend over there that used to chain clear in Oz. It has been stopped so of course its buring there. It was...