Have a look at my post here - depends on what city your are in, weight is an...
Type: Posts; User: Hoooooter
Have a look at my post here - depends on what city your are in, weight is an...
Expressions of interest are sought for this mill.It Is really benchtop mill. As it is quite Heavy buyer will need to remove.The machine is in Adelaide. Comes with stand as in the picture.
Lots of...
Hi Viking,
there is something wron with the DXF file - I cannot open it.
Cheers
Yes I am interested
I am running it on Windows 8 with no issues.
Cheers
Ken
Nice job.
What are the air cylinder specs?
Hi all,
has anybody had any experience with one of these?
Does it do what they say it does?
website @ Multiplaz. Welding, Cutting, Soldering, Brazing...
Looking for your feedback.
You should have a look at this - It just runs off shop air. No vacuum pump required. Vac-Clamp Vacuum Clamping System : CARBA-TEC
Cheers
Ken
Thanks for that.
I actually have a HM-135 which I have higly modified the electronics on.
I have multiple probe inputs and motor speed feedback as well as a smoothstepper interface.
I am really...
any chance of getting some pictures of inside of the electrical cabinet, and what stepper drivers are being used?
Thanks
Ken
what sort of media are you using, and how much is in that tub (weight of media)
Hi - What would be a good maximum pass cut depth for a 1/4 inch carbide 2 flute endmill running @ 5000rpm and a feed of 15 inches per minute. (Material 6061-t6) - Prefer to dy cut but can use mist or...
I just checked the attachment and it does have the STL file in it
Looking for the best way to achieve this result.
I have a 60deg .125 Vbit to use.
Any hints on the best process in Bocad would be appreciated.
Thanks
Ken
I guess I could put some registration holes in the material stock and make a jig with pins. The moves should then be repeatable. If I put some thoufgt into where those registration holes are I could...
I need a tolerance of no less than .001 so will this work?
Thanks
Thanks for that reply.
The issue is that the part itself is 980mm long and needs to be macjined on all sides and the entire length. What I would like to do is machine it in sections, like the...
Hi all would appreciate you help.
yy x axis travel is 330mm and I want to machine a part (3d) that is 980mm long.
How would you apoach this job? (Boundaries?)
Any strategies would be most...
Hi all I have just done this. - Bought a CNC Mill and Lathe from Taiwan. Total cost US6000 - Including freight by sea ($300 for 600kg and 2 CuMeters)
Import cost were in Total $1400 - Made up of...