There is need some help here too :) I have software disk and i/o card and cables, but machine is not going reference. Manuals is not helpful. So- any help?
Type: Posts; User: AK47
There is need some help here too :) I have software disk and i/o card and cables, but machine is not going reference. Manuals is not helpful. So- any help?
I have emco pc turn50 with i/o card and software and manuals. However machine wont go to reference. And communication with pc/emco is not fully functional.
...
mleppanen, you has not been here for long time, but i still has same problems.
Yes, machine has been as is since last time to try wake it up.
I try set free intterrupt for ISA slot. There was several interrupt possibilities at I/O card and some was more free than others when looked from windows. What may be working interrupts that has work...
And have you tested those MB with emco software and PCturn 50 (year 1995)?
Can you recall what was computer type? I have everything but motherboard for pc. I have try w98se on Abit kta7 witch have one ISA slot but that wont work. Maybe intel chipset and older notherboard...
Hi.
I have to write here about EMCO PC TURN 50 lathe a have.
I have write to emco emails and send web baser reguests. But there is no response - none.
First i try to get this unit...
I use this topic, since i seek sam thing myself.
Anyone knowing nc-rotary table in reasonable prize in europe? We are talking around 1000-2000eur (1500-3000$) now.
No need to servo, just...
Well, if you want theoritical zero backlash with no wear and no huge forces - it is nice problem to think about;) You are rigth about it.
I was only try to give practical view - does system really...
How about something like this? 206924
Hi.
I have here Fanuc tape center DV machine. Control seems to be 11M.
There is 4th axis servo motor connected to machine and it can be drive with pulse generator in handle mode and position...
I have tested demo version and it works ok. Only problem is that FW only give you 1000 step/sec. That can limit cutting too slow if using low pitch screw.