Dear All,
I have some problems to Read and Punch G code into the Miyano Lx-21s with Fanuc 18T model B.
My setting are
TV Check : Off
Punch code ISO/EIA : ISO
I/O Channel : 0
Baud rate :...
Type: Posts; User: ixoxi999
Dear All,
I have some problems to Read and Punch G code into the Miyano Lx-21s with Fanuc 18T model B.
My setting are
TV Check : Off
Punch code ISO/EIA : ISO
I/O Channel : 0
Baud rate :...
DEar All,
My Mazak M5N controll t32-2 all parameters lost.
Does anyone have the parameters??
Please help
Thank you.
Dear all,
Thank you in advance that you have read my post.
I confused about the method for changing language for T32.
Someone said that I must change some boards and chip inside the control...
I have this Custom Macro Program in my
Miyano TSV-21 Controll Fanuc 0M-A
O9003
N50
N100 G65 H81 P800 Q#1000 R1;
N150 G65 H81 P800 Q#1004 R1;
N200 G91 G28 Z0 M89;
N225 G49;
Thank alot for your help man.
I can solve the problem.
Dear Sir,
First of all, Thank you for your reading my e-mail.
I have 1 Miyano TSV-21. The control is Fanuc 0M-A. The problems are all about ATC.
When I command to change from tool 6 to 7 or...
The following is my Custom Macro program of my Takeda Drilling Center Fanuc 10m:
O9000(ATC CUSTOM MACRO)
#3003=1
IF[#1012EQ1]GOTO8
IF[#1013EQ1]GOTO8
IF[#1014EQ1]GOTO8
#101=#4003
#102=#4002 ...
Dear all,
My Machine, Mori Seiki YDC-96 Control Fanuc 0M-B, faced problem. When I wanna send the program both punch and read, it can't be done.
When I wanna read the programs into the...
Hi to all,
I have some problems to install the Rotary Table to fanuc 11m System. Now, it can move, clamp and unclamp.(Clamp and unclamp by Hydraulic)
My problem is about the ladder diagram of the...
If anyone have the definition of parameter of Fanuc 6t on no. 0-5 and 300-304
Because in the manual don't have all of the definition of these no.
Thank you in advance...