Do you have a centre in the end.
What kind of material is it.
Are you using the proper chip breaker for the material.
What depth of cut are you roughing and finishing at
Type: Posts; User: zumone
Do you have a centre in the end.
What kind of material is it.
Are you using the proper chip breaker for the material.
What depth of cut are you roughing and finishing at
I deburred the first thread of a 3-1/2 IF API with a file and was told API spec is to leave it sharp on the chamfer is this true.
This is all I have
We have a DMG CTX620 with Shopturn/Shopmill 840D year is 2010. Whenever I program a pocket or spigot it always cuts in the conventional milling direction. Is there anyway to change this.
We have a DMG CTX620 with Shopturn/Shopmill 840D year is 2010. Whenever I program a pocket or spigot it always cuts in the conventional milling direction. Is there anyway to change this.
Can anyone share a generic Swiss post so I can just post the g code I created in Gibbs. It does not need to be customized I do not have a Swiss post and just purchased a citizen machine need to get...
I have the post at work if you send me an email with your request I can get it to you next Wednesday. [email protected]
I have created a tutorial that teaches how to create a file to 2 axis lathe and 3 axis milling. Send me an email at [email protected]
Send me an email I can get it to you [email protected]
Send me an email at [email protected]
I have 4 axis haas and fanuc mill posts, I have 5 axis okuma mill post, c axis okuma lathe post, 2 axis fanuc and haas lathe posts. If anyone would like to trade or give it to me I will share all of...
I have turned on hi cut pro with max feed 1500 tolerance .0001 and high feed option anything I should know about this parameter as I can't find it in any of our manuals. But enabling hi cut has fixed...
Yes we have hi cut pro on the controller.
No the osp200m only accepts G94(IPM) and G95(IPR). It seems g93 is not supported by the controller.
Hello,
We own an osp 200m okuma mill I have looked through the entire programming, parameter, and operation manual but cannot find a fix for the problem I am having. I will draw out some sample...