Search:

Tried various m-codes from the programmer's hand book,to no avail .I thought it might be an encoder problem ,so traded the encoder from the main to the sub,and same problem. I then traded the drives...

Eurotec 420 SLL .When we call up the c axis with a m10 the motor just hums . It looks like the break is holding it from orientating.We tried a m71 to release the break in the line before the m10, we...

Need help I moved a Eurotec 420sll in to a new facility . The controller is fanuc 18t.The voltage changed from 240 open delta 3 phase to 208 wye 3 phase. When we powered the machine up ,we homed...

Need help lining the c axis drive up in a duplomatic tool turret.It is on a Eurotech 420 sll .The sub turret was crashed , we lined the tool path back up .Now the c drive is out of alinement.Any...

Need Help . Need a wiring schematic for a Haas hv7 indexer Thanks Dave

Looking for manuals for wasino L J 63 M,with 10 T controller.Any help will be greatly appreciated
Thanks Dave

The controler is an 18 T. Been looking all day ,and pulling hair out.Almost bald now

I've got a hardinge chnc III that we pulled the x axis motor and encoder off of, and con not establish the x axis reference.When we put it back together it over travels on x when we try to home...

We lost part of the parameters in a fanuc om controler on a Kiwa vmc.We have the parameters on cd ,and a lap top. How do we get them from the lap top to the controler?
Thanks Lost Dave

I do have those servo alarm in order

414 servo alarm: X axis detect err
417 servo alarm: X DGTL param
424 servo alarm: Y detect err
427 servo alarm: Y DGTL param
434 servo alarm: Z detect err...

Need help .Looking for a fanuc 0m series operators manual.
Thanks Dave

Looking for information on a 16 c deublin collett closer.I'm trying to find parts for a rebuild. Thanks Dave