Hi,
My situation is a little similar to yours, here's what I have:
I have a 1984 Pacific Press 225 tons x 10 feet. It originally came with a control that is about 50% operational and no one at...
Type: Posts; User: dangercraft
Hi,
My situation is a little similar to yours, here's what I have:
I have a 1984 Pacific Press 225 tons x 10 feet. It originally came with a control that is about 50% operational and no one at...
Never mind, I found the thread Mike posted about the Servo-Belts
You're right, I should have multiplied by 2.5, not divided. Don't know what I was thinking about.
Thanks!
Frank
Hello everyone,
I'm in the process of rebuilding my VMC. Beside changing the control to LinuxCNC, I am going to swap the servos and drivers for newer, more modern units. The original units are MSI...
According to the manual, continuous. Those things are enormous.
Frank
Ok, found out the machine came with 200 in pound servos, thats about 22.59nm. To to figure out what to do.
Dangercraft
For me, its a combination:
1) Return customers. (Most important)
2) Word of mouth from return customers.
3) Marketing. (Website, brochures... I don't do anything else.)
If you can solve hard...
Hello everyone,
I got an old (1984) 225 ton cnc press brake and after a few months of tinkering with it I finally have it running pretty good, making some really nice bends.
I'd like to put...
DOH, you're right, I screwed up.
What I meant was 2.5 turns per inch.
According to the manual, the rapids on this machine are 790 IPM. So thats: (790 IPM / 2.5 IPR) = 316 RPM.
That...
Hello everyone,
I am working on my home VMC and I have a quick question...
First some background:
The machine is a Tree VMC 1060 (about 1994), travels are 40x24x25. I got this machine for...