Did you ever get this answered? There is a list of timers hidden in the Mits controller. There is one for the "Jet" on-time.
Type: Posts; User: Tasdau
Did you ever get this answered? There is a list of timers hidden in the Mits controller. There is one for the "Jet" on-time.
Thank you.
I have a Chain feature (gear) that I created and I want to convert it to lines/arcs/splines. I'm a total Esprit noob and I can't find anything in the help menus on how to do it. My exported iges and...
The FX series has been around for about 25 years. If you buy a used reader there is still a chance it may not work very well. You may want to consider getting one from MC Machinery. They still stock...
Ok. Thank you.
...and was wondering what these plastic inserts are? Should they come out before install? They are open except for that little tab in the middle.
Thanks in advance....
Does the machine have a hard time 'finding' the .020" hole? Your jet pressure may be too low or the jet itself may be out of alignment. Test the jet in open space at about a 5" height. It should go...
I was referring to the '4 axis program'. If you're going to run it, make sure the 'Absolute UV' switch is turned on. Your machine has it in the- Maintenance menu->Switches->Switch Screen 2.
...
Too late. I already made a program for a standard taper and one for 4 axis. Your geometry was simple enough for a standard taper but I thought I would also make a 4 axis so you could see the...
Just realized your G code was in your original post. There are a few things that need to be changed-
1. You need to have a wire compensation code (G41 or G42) otherwise your U and V won't move...
Can you upload your G code program and an IGS, DXF, or DWG of the upper and lower contours?
I have never used FeatureCAM (I use Mastercam) but it should spit out the code the same way. I will take...
Not sure what version you're using but this works through most of the X series and presumably 2017-18 (maybe with slightly different function names).
Go to: Create Curve-All Edges-
Activate...
Yes, The manuals could be written much better.
Once the Z3 and Z4 numbers are set, never change them manually- always let the machine configure them. If your post outputs those codes, delete them....
Are you still having issues? I can help you if your machine is still not cutting tapers properly.
Hi All,
I figured this is worth a bump.
Wayne Hill's original program (post #15) and Jonk's (#36) were the only two that worked for me. Wayne's read all my G codes with the shortened syntax of...