UPDATE!
Finished the 2 - Steppers for the "X" , The 2nd Stepper will use the 4th driver on the RAMP 1.4 board & the hot tip "EO" will be moved to the 5th driver.
...
Type: Posts; User: skip20
UPDATE!
Finished the 2 - Steppers for the "X" , The 2nd Stepper will use the 4th driver on the RAMP 1.4 board & the hot tip "EO" will be moved to the 5th driver.
...
UPDATE!
Finished setting up the 2 - "X" stepper motors, Stepper #2 will run off the 4th driver & hot tip will move to the 5th driver on the RAMP 1.4 controller.
...
The "X" axle will now have 2 stepper motor a left & a right.
Here the new mounts are being machined.
http://i1358.photobucket.com/albums/q769/skip4450/3D%20Printer/DSCF1902_zps696dcb86.jpg
...
Will be making changes to the "X" drive assy. on the KS 3D printer.
Working on the wiring.
Added 1"x1" Alum angle to the corner also.
Need to do the front door still, ether one or two.
...
Did a little Laser engraving on the front panels.
On the upper panel you have the name of the person that I got the box idea from on Thingiverse, then the RepRap logo & name of the printer & last my...
Sorry Khalid, been so busy just from these to 3D printers, My custom built VW Trike & a inkjet T-Shirt Printer, that all I've been doing is post & not really reading anything.
Also, it seems that...
Ordered the plastic parts off eBay & they look really good.
Rostock Printed Parts 3D Printer PLA Airtripper Extruder Taulman Bushings RepRap | eBayI broke one of the forks for the rod & he replaced...
Using 1/2" wood, I trimmed out the edges building a 4" base to clear the controller & P/S mounted under it.
Trim some space on the bottom for air flow.. Came up the rear sides with 1/2" x 4" & &...
New one #3
http://i1358.photobucket.com/albums/q769/skip4450/3D%20Printer/DSCF1879_zps3e2e00a6.jpg
Here is a short video with my old camera which I was have problem with before.
3D KS printer (king size) Build - YouTube
Latest update:
Finished to 2 print head mounts & belt drive.
The 2 heads are connect with a 1/2" bar which will be bolted downwhen in use.
Otherwise head #2 will be locked down to the far right...
Been working on my 3D KS Printer on & off between other projects to finish up.
Got orders for a few Honda GoldWing Trike Body's, so been fiberglassing them.
Here is where I was at this morning.
...
Mounted a 1/4" 2 x 7" to the 2 bearing trucks on each "Y" axial This will rise it up to clear the RAMP board mounted next to it.
Jig saw the 1/4" bottom mounting plate. Will mount the 6061 Alum...
New redesign.
Moved the steppers to the top to get the print head down lower.
Also made "Z" screw mounts out of Black Acetal Acetyl Delrin Block.
Now to figure out the table "Y" setup.
Tested the...
Hoss is the MAN!
Yes you can, but it will be over built. Mach 3 will control it.
You woul nee to build the board to control the heat bed & themo.
Check You Tube, you will find a few on there.
Thank you.
The "KS" is for "King Size" or Skip Koons!
The basic framing are 1" x " 80/20 I had laying around here. Built the frame the fit the rails
The slide rails (Ebay) are 17" long & come with...
Here's the latest update on the KS build.
Been redoing the "X" drive setup.
Elec is all hooked up, but have problems with the ramp board.
The LCD Screen is not showing text & I get a SD Card error...
http://i1358.photobucket.com/albums/q769/skip4450/3D%20Printer/DSCF1812_zps222c05b7.jpg
http://i1358.photobucket.com/albums/q769/skip4450/3D%20Printer/DSCF1813_zpse06e8fcc.jpg
I'm back after a long rest.
Just finished building the MakerFarm Laser i3 8"
A few problems came up, but now she laying down her layers.
...
GREAT SCORE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- - - Updated - - -
You have been bookmarked
Back in the '80's had a Universal 1750 50watt laser & the cooler was a water cooler w a tank for the water.
I have built 3 Tables with the 2" 4" 80/20 tubing with 4" x 4" legs.
Built it a least 50" wide X 10' cutting area as that is the size of metal sheets.
Rack & pinon is the best drive for it....
Try a drinking water cooler & use distilled water.
For wood, try a store wall display board.
You can get the plain w/T-slot, Alum T-slot installed or lamented.
Check at store hardware supplies in you area.
The are 4' x 8" x 3/4" Hardboard.
See my...
What did you do about the round column?
I used Grade 8 bolts & it still moves sometime.
I pinned the rack on the side with no help there.
I had a few posts here on my machines some time ago, but...
Looking good, Great Christmas Gift.
Haven't been on for a long time.
It's cold outside so I guess it's CNC Time inside.
Skip20
This should be gooooood !!!!
WOW, Sure hope you have a Label Maker!!!!
Skip