Search:

http://img.photobucket.com/albums/v222/pantswagen/NEMABIPOLARPARRALLEL_zpsfcd644b1.jpg

http://img.photobucket.com/albums/v222/pantswagen/IMG_20150901_154851_zpsp4a60n5t.jpg

hello, I have bought some matching 200w Panasonic minas a4 motors and drives

I wanted to use a 24v mach3...

need to know connections to driver step +- dir +-

have the connectors , these have been cut

i have a fb2
the bars that poke through the sides are end stop triggers
you have built in switches on the non motor ends
the original limit switches sit on the motor mount

MADDT1207003

driver

MSMD022P1S

motor


the driver with the 003 on the end stipulates step pulse inputs? rather than the stock 'analoughue' and the 'p' position only?

if so I may have to buy one.

hello

how would I change the coordinate system of say sheetcam.tap toolpaths to drive a H-bot rather than your traditional x/y gantry system.

have sheetcam and mach3 - have bought a usb...

http://img.photobucket.com/albums/v222/pantswagen/IMG-20140220-00317_zps8798aaa5.jpg

hello
the long side are 90 by 45 = 1450mm
there are six bits
-----------------------
the short sides are 1080mm
there are 6 bits of this
--------------------------
the legs are 90mm by 90mm...

oh the uprights are 4'' square 100mm
the cross peices are 75/50
there is loads of 45mm
lots of bolt on angles and bits switches and what not
all cheap or trade

hello ,
name
steve
job
signs

why here
just bought a 2001 ISEL desktop cnc machine,
http://img.photobucket.com/albums/v222/pantswagen/IMG00727-20130606-1254_zps871b5e3a.jpg
I have the...