Hello. Sorry I dident see your reply utill now.
I changed encoder with Z axis and cleaned everything. It solved it. Atleast temporary. Let's see it it stopped or moved to the z axis. Atleast if...
Type: Posts; User: nikolaiownz
Hello. Sorry I dident see your reply utill now.
I changed encoder with Z axis and cleaned everything. It solved it. Atleast temporary. Let's see it it stopped or moved to the z axis. Atleast if...
Hello - sorry for bumping this old thread.
I got a LC 30 that whines from the spindel and having a hard time making a good surface like my LB 15 with same feeds and speed.
Will this be the...
Hello
My old VQC 15 has some problems with Y axis.
I threw this alarm today "50 Y FEEDBACK ALARM"
I ran a program that was proved and i just did 5 parts previously.
I got some problems...
Hello
My old VQC 15 has some problems with Y axis.
I threw this alarm today "50 Y FEEDBACK ALARM"
I ran a program that was proved and i just did 5 parts previously.
I got some problems...
There is 3 versions of the main card 3 I use. A B C. Mine had a A in it but the card o put in was a C so I think all thoes a compatible in mine
Sendt fra min EML-L29 med Tapatalk
I fred my main card 3 because I had a ****ty cable. They are very easy to mess up.
I grabbed a working card for around 150 bucks on eBay and not the machine transfers fine again.
Sendt fra...
Hello
I started getting this error when booting my vqc M32 op.
If I turn it on after a day off it will throw this message after the loading bar. But if I turn it off and on again it will jump...
Pichttps://uploads.tapatalk-cdn.com/20190723/f5e0bb3245b91d1b20ae894698aa80ac.jpg
Sendt fra min EML-L29 med Tapatalk
The menu is not therer. Should be under f2https://uploads.tapatalk-cdn.com/20190723/7c1f6ed3630a7e5de6d70db1f30a11b6.jpghttps://uploads.tapatalk-cdn.com/20190723/7d2fe85a42529192e530c27058f068e0.jpg...
Hello.
I replaced my ref. Button and now I need to move my X offset. But I am not able to select X and zero it.
Anyone know how I change it ? Not much in the manuals
Sendt fra min EML-L29...
Hello can you tell me how to disable the tool measure unit? myne got a bad sensor.. and i never use it.. Its giving me an error and woule like to disable it to get the error gone.
I got a VQC like...
I can't seem to find anything under ec inputs.
Sendt fra min EML-L29 med Tapatalk
Hello
Can you email me? i got a VQC like this from 1990 - i got some servo drive problems maybe you can help me with :)
my email is vohnsen AT gmail.com
How do I check it ? I don't have a spare is can check with sadly. I tryed to massage it abit but I also goes overtravel sometimes. I think my switch is broken
Sendt fra min EML-L29 med Tapatalk
Hello
Anyone kno what my problem is ? I does this when I want to ref my lathe. https://uploads.tapatalk-cdn.com/20190626/33163229c9710e553fb36628486c3334.jpg
Sendt fra min EML-L29 med Tapatalk
Cheers mate. Will check it today when o get in the shop
Sendt fra min EML-L29 med Tapatalk
I can't find where I can see it the foot switch is working [emoji849]
Sendt fra min EML-L29 med Tapatalk
In the parameters ?
Sendt fra min EML-L29 med Tapatalk
I don't have tailstock and part catcher [emoji28]
Sendt fra min EML-L29 med Tapatalk
I found out that the confirmation was not on so i adjusted it and not it works in auto and I can do it in the program. My advance pedal still dosent work it might be a lose connection. My retract...
Hey
I am making some parts that require tailstock so my program faces and centerdrill my part and I've manual reset and advanced the tailstock in MDI with M56 and restarted the program for now. ...
I got osp 5000 l-g on a old lb 15
Here is my parameters and my cimco settings.
I use the TT: when...
Maybe its some settings issues..
When i punch and read i write punch "A A.MIN,TT:"
if i dont use the TT: when i punch and read it dosent work and give me the same error
And i read i just...
Yes that's is very likely. nEVER remove cables when the old okumas are on. They do not like that at all.
Sendt fra min EML-L29 med Tapatalk
Ok so i found the problem - it was a handshake problem.. the control was set to use hardware handshake. i changed parameters to what some guy wrote on the forums. now i use software on control and...
Like I sayd I tried but it not sending at all with any other rates. Just get an error
Sendt fra min EML-L29 med Tapatalk
Yup mine has tape and huge floppy disk
Sendt fra min EML-L29 med Tapatalk
I Will be looking into it tomorrow when I get to the shop. Thanks
What do I look for in xon/xoff ? I a fairly new to dnc setups so sorry for asking ø
Sendt fra min EML-L29 med Tapatalk
Okay there might be something into that.
Deadly kitten says that there is something every 256 char op on the post.
I use hardware on the pc if I don't it's not receiving anything at all.
...
Yep I know. It's just strange that first time it uses the name in the file and next time I send it doesn't. Even though it's exactly the same program. Doesn't ask to overwrite or anything.
Sendt...