i have been told the DM542T will do the job
i have one on order
thank you everyone for all your help
Type: Posts; User: rocabig
i have been told the DM542T will do the job
i have one on order
thank you everyone for all your help
thank you
i did the googling and everything seems fine right up to when you go to order/pay when they say 'this item is not avalable'
thanks again
My 12 year old excitech 9060 step driver just failed and am trying to find a replacement
any help will be much appreciated
im in brisbane
the driver is a MS-2H057M from shaphon Co ltd usa...
[QUOTE=big-div;1769006]Do you have a link for where you got it from mate?
50W USB Laser Engraving Cutting Carving Machine CO2 Laser Engraver Cutter | eBay
as for the cost of tubes a 50w tube...
I have the 50 w version (the next size down)
works well I use it for engraving not cutting
haven't had a problem you need to replace the laser tubes every now and then (they are a consumable item)...
Try these guys out
http://www.vectric.com/
I have aspire and have never had a problem
it is easy to use
there is a forum on it too with lots of helpfull people
you can try the free trial to see...
Thanks Dave
the two power supplys i have blown up have come from the manufacturer of the machine
think i have found a reliable sourse for a new one in the usa at least it is tested and comes with a...
i have one but it's no good picking my brain as i have only had it since 25/11/11 and only used it for a mass total of 3 hours and had 2 power supplys blow up
Richard
had a similar experience during the last 3 months with lovehappyshopping3/zhen_deng/world-etrade (they use all three names) with a laser have used the laser for a mass total of 3 hours and have had...
Thanks guys
was going to modify the case to fit a larger tube anyway
have had 2 power supplies go up in a big ball of smoke in the past month the machine has never been used above 10mA i dont trust...
I have one of those cheep chineese 40w co2 lasers and the laser tube power supply blew up i am thinking of upgrading the laser to 50w at a latter date but thought is it posable to put a 50w power...
I have one of those chinese desktop lasers with a moshidraw usb control board and was thinking about replacing the control board wih a retina engrave usb board
has any one done this?
dose it work...
I have a shg 0609 with a self cooling spindle sdk80-24zr/1.5
does any body know what type of collet nut is on this spindle and where I can get some as I am looking to get some more
there use to be...
I dont have the 1212 i have the 0609 but had the same problem
it ended up being the pretensioning nut on the bearing for the
ball screw shaft had tightened itself a bit too much
just back it off...
Hi Andre
Thank you that explains it.
Richard
I have solved the problem allready by reformating the dsp but would like to know what caused it
when you look at your dsp screen on the left normaly you see
1X
1Y
1Z
I finished one job ok...
Not a problem
been throught that before know how anoying it can be
when your machine wont work.
Richard
when this hapenede to me ronny from exertec sent me this it worked for me
1.please find the PC to DSP black cable , before you connect dsp to pc, please pressing the green "ORIGIN/OK" button all...
Bought mine a few years back as a toy to play with now it is has taken over and is the main income provider
apart from a stepper motor shaft breaking in the first few weeks of ownership no...
Thanks Shannon that worked great
Richard
A friend of mine has a 1212? or a 1218? cant remember which he is new to cnc and has played with the settings in the DSP controller it now cuts everything double size i.e. if a job is 90mm tall it...
yes
i also put a squirt of oil on its rails
Richard
i oil them thought about changing them to grease points but thought it is going to be dificult to clean later so i oil them daily. use a standard grease gun on all the other points
Richard
here are the photos
Richard
ps there are some threaded holes on the side of the ball nuts for grease nipples but for some reason the factory dont put grease nipples in them when they ship your...
i found the quickest way to grease the nuts in the future is to make sone grease nipple extentions. you get some small copper pipe and thread one end and to the other you braise a grease nipple to...
just found another one
available at officeworks
about $11 for the 1Gig
works well on my machine
http://www.lexar.com/jumpdrive/jd_firefly.html
Richard
Last Night Ronny (Tainiey's offsider) fixed the problem over the net cant give excitech after sale service any greater praise they realy come through every time.
Richard
Today my dsp handset on my shg0609 decided to "it is bootloading please wait" nothing works on it it wont talk to my pc or vice versa so i am looking for another handset asap and was hoping that some...
Thanks for the help guys
have got a temporary replacement stepper till sh-cnc send out the new one covered under warranty
went out yesterday to jaycar and got the spider coupler, had to machine...
just had a search around and am getting apex to send me the specs on the motor
was un able to find a flex coupling any ideas where to find one
thanks again
Richard