Search:

Sent you a PM

Dave

Rolex Spring
part number AM231215

You'll get about 4 to 5 hundred washers for their 50 dollar minimum charge.

McMaster Carr doesn't have the right size, I've looked into it.

Dave

What has worked well for me so far is 1 1/2 dia. initial depth (1st peck), 1/2 dia subsequent pecks.
Dave

Mastercam X X2 X3 or X4? Got them all, Centurion 5. It will work with Cent 6 and I believe a Cent 7 control. Codes are all the same, Centurion controls, newer versions such as Cent 6,7 changed only...

Resent

Dave

Email sent.

Dave

Yes I do, need email addy and I can send it.
Dave

Hehe, well, a million dollars would be nice:stickpoke
Hope it works for ya:cheers:
Dave

Can't send it if I don't have an email addy:confused:
Will get it out pronto when I have the address.
Dave

Nilesh,
You have a private message
Dave

You might want to check your parameters in the machine, IIRC, MISC page. Check that G18 = XZ
Dave

Toby,
Have you tried the V11 yet?
Dave

Just read this thread and I may have a fix. I recently upgraded to X2 MR2 level 3 and I'm stoked but I also was having some video glitches. I also use ATI video cards in the desktop and laptop, on...

Do you people still need a manual for a Richmill CNC 30?? I finally got my hands on one in PDF format.
PM me with your email if you'd like it.
Dave

Fred,
PM on the way with an explanation.
Dave

You may get lucky and the usb to rs232 will work, mine did not. I use a pcmcia to rs232 and it works great. For transferring to the machines I use http://www.controlinksystems.com/
Search ebay,...

It can be done to a point. The quality of your model would be directly related to the info you can give it. Mastercam can reverse post nc programs but unless the program was written using cutter comp...

Your line will go straight in the parts highlighted in red, assuming that's what you need. Not having an x value should really not make any difference. You could put the las x value in each line and...

Read this, pretty informative.
http://www.cncci.com/resources/tips/how%20g28%20works.htm
Dave

I would email this company, maybe they have them or can send you in the right direction.
http://www.machinery.co.uk/directory/80001127/company-details/The-Colchester-Lathe-Co.aspx

Dave

You have to find a lathe just like yours or get a hold of a dealer that sells or sold tornado lathes. The diag parameters control all the switches that run the lathe. If you can save to a pc that...

Did you put the diagnostic or "pc" parameters back in? If not it won't run like it should (ask me how I know that!) They are numbers 300-549 on the diagnostic page.
Parameters 900-940 are the ones...

I GOT THEM!!!!!!!!!!!!!!!!!!!!!
Woohoo, called Takisawa USA and they had them on file.
Dave

If i had the 10300-10549 parameters I would do that. Does anyone have these????????? Anyone here have or know anyone that has a Takisawa TC-1 and can get them?

Dave

Fanuc guru's,
I have a problem I can't figure out. I managed to delete all my parameters, something dumb happened and I couldn't clear the error, I pushed and held reset and powered up the machine,...

Fillet the planes/surfaces not the edge. You may have to uncheck the constant radius box.
Dave

What version control are you using? Are you sure your z isn't moving .0001??? Are you programming in metric? Need more info.
Dave

Is your subprogram in incremental?
Dave

I see. I wonder what it causing the noise? Maybe some stray voltage running back through ground somewhere? Or is it just a bad cable and nothing else. My issue wasn't so much a noise issue as it was...

Did you replace the cable to eliminate the noise?
Just curious as I know a guy that was having the same problem on a Partner 1 and he eliminated it by replacing the entire cable. I had to replace...