Search:

no intrest in the next week I will pull it off the list

Rich 7702;
the Hermes 7000 runs on dos not mac there may be a program out there to do this but I don't think so, win XP or older it run on a parallel port. hope this helps good luck

Hermes Vanguard 7000

It works !!
Have a vacuum pick up for the shavings, 19 cutting tools bits, program + computer to run it, with program, extra cutting head, all the books and instructions
$...

It apears that the spindle is not raseing up to your set point, the spindle may be sticking. I use a very light 5 weight oil on my spindle, so I don't have that problem, I cut abs plastic and wood...

Have you checked to see if the vaccum table is plug in some areas, where the spindel is not dipping but the table may be higher?

The bimba type cylinders are made of aluminum, and so is the piston in side, they have a small rubber "O" ring wraped around the piston, if the cylinder walls or piston have not been damaged you can...

Glad I could help. Remember you need good supports under the peg board.

I've not used Gravograph, and WinPCsing works for the most part like Adobe Potoshop 7.0, and it has the drivers for the Hermes 7000/9000, Potoshop does not have them that I can find. WinPCsing will...

I pick up WinPcsing, it works quite well, Thanks.

roundrocktom:
You can make a vacuum table, use peg board, make a box the size you need, place the peg board on the top with a tight seal, use a vacuum cleaner for the suction, a small one will do,...

What drivers do I need to run a 15 year old new hermes that use to run on dos, I ran this for a wile were I work but I don't want to run it in dos, it takes to much time setting up. (That is why I...

hi Craig:
Thanks for the info. Glad to here you have your unit making some cash for you, I hope to do the same.

Hi brian257:
I just got a Hermes 7000, and with it I got a sales book from, Gravografph, there may be someing there at Engraving - Gravograph - Rotary and Laser Engraving Systems : engraving...

Hello I'm Roger,
I am A Millwright / industrial mechanic, I work in the lumber industry, the company I work for was selling of some old assets one being a Hermes Vanguard 7000 witch I have at home...