Hi,
The DM542 is an excellent stepper drive updated from Leadshine "M542";
I've used it myself and am very impressed with its features and performance.
The DM542 however allows microstepping,...
Type: Posts; User: allen2080
Hi,
The DM542 is an excellent stepper drive updated from Leadshine "M542";
I've used it myself and am very impressed with its features and performance.
The DM542 however allows microstepping,...
Hi Jimskeet,
I think this may help you! Its a Multi-axis stepper driver from leadshine (Leadshine Technology Co., Ltd.) .
Thanks.
Hi NIC,
Yes, the drive DMA860E can take both AC and DC power input, just keep in mind that the power supply must be in the range, otherwise, it's easy burning the drive.
Here i show you the...
Hi John,
According to your descriptions, that would be something wrong with your enable signal, usaully Leadshine keep low level active for enable input.
Please check the motor shaft locked or not...
Hi John,
When Leadshine ES-DH1208(Leadshine Technology Co., Ltd.) shows L O its means get ready.
So i suggest to check the signal wires broken or not?
Hope this can help you!
Hi,
Why you want Leadshine DM2282(Leadshine Technology Co., Ltd.) IC numbers?
Does something wrong with your DM2282 IC?
Hi,
Did you get the Leadshine DM556 User Manual, it can slove you all these questions!
Also you can download the pdf version on this: Leadshine Technology Co., Ltd.
Hope this can help you!
Hi Nick,
Can you show me wiring diagram of the whole CNC router?
NPN homeing switch should have an independent power supply. If it share a same power supply with the Leadshine MA860H or other...
Hi jacoe,
Leadshine ES-M23480 can satisfy your requirement. This is the speed-torque curve when ES-M23440 drived by ES-D808.
358314
However, in order to leave some redundant, i suggest you to...
Hi gcnc588,
If the red light flash one time, that means this module is over current. And if after power on, can not remove this error, then this module maybe damaged.
Try to restart the drive,...
Hi yeck,
According to your descriptions, i think the communication is ok between your PC and the drive.
Try the Leadshine Protuner Program on Windows 7. Maybe the program not compatible for...
Welcome to join #Leadshine (Leadshine Technology - Home) for Exhibition SIMM2017 (Shenzhen International Machinery Manufacturing Industry Exhibition)!!!
Time: From Mar. 29th to Apr.1th
Booth: 7H12...
Hi, NCS007,
I was familiar with Leadshine Servo Products! Maybe i can help you. But can you tell me more details, Because i still don't know what the problem is?
or you can contact Leadshine...
Hi abdusalam,
Maybe you problem just cause by interference, solve this, solve the problem.
Hope this can help you! Tks.
http://www.cnczone.com/forums/attachment.php?attachmentid=356126&stc=1
https://www.facebook.com/leadshinetechnology/videos/1127755374001371/
Leadshine Stepper&Servo for Industry Applications!!!...
Hi jacoe2222,
Let's make a simple calculation. if a same input frequency ( 1000Hz ), and then
306 Pulse/Round: 1000÷306= 3.3rps
200 Pulse/Round: 1000÷200= 5 rps
That's why the motor rotates...
Hi aldus,
As i konw, the HBS2206 Easy Servo driver is Leadshine product for China Mainland. Where did you buy it? I have no idea about this model Easy Servo Driver.
If you need technical support,...
Hi All,
I'm a CNC newbie, i want to build my own small CNC machine.
Going to get guidance! Thanks.