You can start a motor up to the size of your converter and run about 5 times the size
Type: Posts; User: Kevin61186
You can start a motor up to the size of your converter and run about 5 times the size
Never tried on uhmw but on aluminum I grind my bits with a chip breaker let me know if this wors for you
It not about wood its the cheap homemade machines just because you can use mach3 on your wife's laptop
Dose not make a machinist most people that run a cnc are not a machinist so it nothing...
Has anyone retrofitted a old Cincinnati I just bought a 10VC-1000 with a Siemens control
Anything but hurco I have been fighting with a hawk 5m for a week
I do everything from service tech to housekeeping I run the machine shop by myself most of the time
Cincinnati 10vc-1000 with Siemens retrofit and 5vc-1000
If you don't have a spindle you can't be a machinist and a router is not a spindle
I get 1.8 mV ac. One of the fans on the card rack was not working replaced it and it runs fine now thanks for all the help
Is overheating a common problem?
no checked it with a meter get 5.13 vdc
Pm me and I will try to make you a copy of mine
When it restarts the start / power /hold /cycle buttons light up and the coolant pump runs for a few secents the it restarts and will not boot from hard drive got it to boot from the floppy drive it...
I have a hawk 5m that has the same problem can anyone help