Search:

Got it was parameter 269

Well it isnt in the program lets say i manually move to A90 then go to mdi and do a tool change the trunnion moves to A0 before the tool change it takes a long time. Not sure if its in the macro for...

Is there a way to get the trunnion from going back A0 for every tool change?

Thanks

Don't really need the code let's say I put trunnion at 90 deg manually then do a tool change in MDI the trunnion will go back to zero or are you refuring to tool change code

We just got a new Haas 160 trunnion running it in a vf2 at every tool change the trunnion goes back to zero. Is there a parameter for this to keep it at 90 and not go back to zero? Thanks

ok so changed the parameter it works but now there is no points in numbers on tool length and work offsets?

G90 Doesn't work in mdi so I think its a parameter

Wondering if anyone can help when in mdi I want to move to my workoffsett but machine reads in incremental in mdi not absolute?

I am trying to figure out how this works but really confussed. Any one out there that can get me started. Thanks

Ok so we have these castings on a indexer. I probe the y on the casting that puts my G59 Y workoffset in, each casting is diffrent .I then mill the y so that establishes my Y0. Then I index 90 deg...

Thanks serviceman that did the trick its running good now its funny how you can answer the questions quicker then the local dealer on the phone. You are a really sharp dude.

Thanks again I...

Thanks serviceguy I tried all you said I have a list of parameters tried everything now it says A-axis motor ov. I might have to get a service guy out here.

ok so I did all that now and I get a A servo t error. I tried changing parameter 128 to 1000 0 and -1000 and 16384 , 0 , -16384 but nothing worked?

Ok so we got the converter box it was 1000.00 anyway I am not sure what to set setting 30 on? I contacted my dealer there looking into it i hope its not long. The number on indexer is 216649 if any...

We run 2 Haas indexers they are brushless so they have the 2 cords. One of are customers sent over a Haas indexer for us to run a special job its already fixtured up. Well it has only one cord and...

I was looking at trying one of these to drill a 1.250 hole. But all those that size have a 1.5 dia shank? Are these mainly for lathes?

Looking for the main power switch in back of machine it has a number ABS 203
called local machine dealer they cant find it, the told me a number HBH-20-G
anyone know where I could find a fix the...

I would like to be able to have my tool list and a picture of the part with some added text. What I would like to to do is have it put on 1 page of a pdf, so each time the job is run the setup notes...

We have a Haas super vf4 high speed and a Vf5 regular The Hsm Vf4 is way faster tool change and doesnt slow down at all,we also have the probing on both machines a must have in my opinion way faster...

Have a Kia here where i work and have ran a few others before. I dont care for them much but the do work.

If you go to preferences under file then under click edit appearance settings click duplicate you can re-name it then click the tabs on top right to change colors it takes alot of trial and error to...

I chamfer everything because i am to lazy to de-burr and it looks beter anyway. With carbide I go 8000 rpm with a feed of 50. ipm.

The pc I use is a Pentium 4 2.80ghz with 1.00 gb Ram is a Dell. It seems ok for most everything. If its a huge program it starts to lag a little especially with the Flash cpr. I can usually run 4 or...

I also have the Haas turn off at m30 and I always walk away while its running but I also like to gamble lol.

Ok so it ended up being parameter #29 i changed dfilterx8 to 0 and dfilterx4 to 1 and the humming noise is gone and the load meter stays on 60.

I just changed the oil on a 210 its been running for 2 years and never leaked a drop oF oil. But The other day air was leaking out the back. So order the 2 diffrent o rings pulled the cover and there...

I have plugged it and honed the surface on a few bridgeports worked great lot of honing but couldnt tell the diffrence.

I put in 16384 and it worked great the A0. position in my offset did change.
Thank you for the help

Ok I will give it a shot will this affect my setup? Or should I wait untill I am done with these parts?
Thank You

Just got a new indexer for Haas vf-5 when we zero axis's in the morning every time it alarms out and says 168 A zero Margin too small?