Search:

I have a Mazak Intergrex 200SY with a Fusion 640MT control on it. The Z-axis in about .050 off when it goes for at tool change. The ATC arm is hitting the back standby pocket. I think I should be...

Need help on a Mazak AJV 35 that had lost the battery/parameters. Reloaded and the machine is running but the 4th axis was not from the factory. This is the info:
Drive:
ME-S11-100-E01
Motor:...

I am trying to DNC interface two retrofit machine with a 0ITD control and they do not have the RS232 port. Can I buy the cable and plug it in to the JD36A plug behind the screen and change parameter...

I am trying to open and edit a hwacheon ladder with Fanuc Ladder iii. It is asking for a password and will not let me view it or edit it. I know the password is 1234 for view on the machine. I...

Thanks for the Quick responce. This is a DC motor and drive. There are two proc switches to count the stations. I just need to know how to slow the DC motor down.

Scott

I am having problems with the turret on a Mazak SL40 T1 control. We bought this machine used and have never seen it run correctly but they claimed it did run. Everything works but the turret. This...

I am looking for a Power Master Universal electrical manual or just the part for the front turret encoder. The machine has a Fusion control. Need to make a new cable for it and need the pinout of...

Thanks, so when I home out the machine how do I set g10?
MDI "G10 Z0"?

Scott

I have a lathe with a 0I-TB control on it. It has non absolute encoders on it ( 1815 all 0). When you power up the machine the Absolute and Machine position is only about .003 off from each other. ...

:wee:
I am trying to build a test bench to test Fanuc servo motors. I have a alpha drive A06B-6069-H205. I would like to mount this drive, supply 230 ac 3 phase to power it. All I need is a way...

This is the same for Fanuc and Mitsubishi parts that are repairable. In fact it is the same for car parts in the USA that are repairable. It is a core charge and the manufacture used these to fix...

Thanks Marco with that information I was able to figure it out. The procedure for my data server was a bit dirrerent, it went like this:
1. I/O # 5
2. Program (right arrow key)
3. ...

Two questions:
1. Do I need to know the O# of the program the control only shows the (Text).
2. Is this the only/correct way to tranfer programs PC-Dataserver-NC?

Thanks for the info.

I have a lathe with a 0T-c data server. I is set up correctly and has been working for 2 years. The operator left last week and we do not know how to transfer programs to the CNC. I can get the...

We just bough and moved in a MITSUBISHI MH-4A HORIZONTAL MACHINING CENTER. Trying to get it running. There is a constant air blow in the spindle, is this normal? The tool air blow does work and...

I have a Fanuc Mill with a 16M on it. The card reader PCMCIA slot next to the screen stopped working. I have check all the cables. The RS232 still works. Is this a hardware problem and which...

Thanks for the parameter I will put it in my OTC book and use it later. This control is a OTB. I don't think you can view the ladder?

Scott

Takahashi TNC - VPO
Sn: U6309
Fanuc OT control

I lost all parameters in my machine after battery loss.
We do not have electrical or PLC books.
Now the M codes 14 and 15 do not work this is...

I would like to run a large program on my 16i Mill that will not fit into memory. I have been told that you can set the I/O to 5 and use the DNC. Does this use the PCMCIA card that plugs into the...

Thanks, Bill I will be going there Tuesday and take a look. Will post the results.

Scott

Thanks, I think this is my next step. I did not want to do this since I have a 120 tool mag and it is full. Card solt on the front does not work. I will spend some time getting it to work and let...

It was Renishaw and that guy no longer works for them, I wonder Why????

I can change all the other parameters and offsets except the 3202.2. Also the 3210 is grayed out. On the other machine is will allow you to input data.
From the Fanuc Book:
"NOTE:
1 The state...

Sorry it was 3202.4

Has anyone used the Password in the 16i control to lock out the o9000 programs parameter 3210 and 3211. I have a control 16i that someone set the password and now we need to access the o9000 to...

In the picture 209e can you see on the bottom of the board, left side, does it say ethernet or network and not have a plug there? I know on the 0i there was a blank spot on the board where they did...

I aligne the turret today. It was out .015 in x-axis to the spindle (running an indicator on the face of the turret. loosen the 8 M14 bolts and removed the taper pin. hooked up the 2T crain on the...

Yes find an old PS2 the small round keyboard plug. It plugs in behind the screen. you can not use a usb to PS2 adaptor there is not enough room.

I have a extra drive A06B-6089-H105 that I would like to build a motor test bench to test CNC motors on. This drive has its own power supply in it all I should need to do is jump out the feedback...

No macro we made up a program to do all the moves that are needed IE the m-codes for a pallet change. We found a list of the m-codes and the positions of Pallet #1 X-0 Y-0 and Pallet #2 X-0...