Ok, so I have made some progress the massive leak I had was the brake system on our table (B axis) now I can move all axis I can home everything I can make a manual pallet change all with no problems...
Type: Posts; User: Maxxheadroom
Ok, so I have made some progress the massive leak I had was the brake system on our table (B axis) now I can move all axis I can home everything I can make a manual pallet change all with no problems...
Well I am a step closer, I found a hydraulic hose that had a pretty decent size hole in it I thought for sure this was the cause I threw in a new hose with the exact same results manually I can...
Hello everybody,
I am banging my head on the wall on this one. We have an APC that originally was draining a full tank of oil when it was clamped or unclamped. I pulled the top of the table off,...
If you give the pins that hold the tool a good push while the arm is in the top position are they kind of sticky? Do they lock when the arm is in the down position?
Can you post a picture of the tool arm? I have quite a lot of experience with these guys.
I don't know if this is of any help but check out octoprint, it uses a Raspberry Pi running a basic lynix system, this allows be to upload/download start programs, stop them and control my machines....
I am just curious if anybody has pulled a turntable out of their Mori? We have an SH-630 that is draining the hydraulic tank in about 30 seconds into the coolant tank when we rotate the B axis. This...
Hello everybody,
I have an SH-630 with an APC issue, a few months back we had another machine loose a couple servo amps due to the hot nature of the parts it was producing we borrowed a couple...
It was in fact an overtravel, got my X back within and almost everything cleared up. Now with new amps I have to re-zero my axis, typically a pretty easy procedure however upon inspecting this...
Well I am chasing the stop circuit down a bit of a different path, it appears the particular branch of stop that is related to KA1 KA2 which is where I need power is very related to limit switches...
So we have checked the interlock, as well as tried putting in a new one. Upon further inspection it appears what we having going on is the contactor that should be disengaging the interlock is not...
Hello everybody,
I'm gonna make a long story short here and save you guys some reading. We had a servo amp death festival over about the last month this poor machine had it's amps borrowed to get...
I know this is a long shot but most of our machines were purchased around the same time, as they age we begin to see a similarity of failing parts among our machines. Over the past few weeks we have...
I have the procedure for zero return however the problem I am running into is it requires I I touch the face of 3rd gear to another gear. The problem with this is I do not know where either of those...
Hello everybody, I am hoping somebody will be able to help me with this. I have a Mori Seiki SL-600MC, a few days ago it lost all power including battery power. I have been able to get everything...
Thank you everybody for the advice, the powers that be have decided to bring someone out and have the ballscrew replaced and setup. Hopefully with the bit of slop that we have this will be the...
So here's where it gets strange and frustrating, I am quite certain you are correct in that the slop is my problem however like I said when I shim it out it makes things considerably worse. Also I...
Hello everybody I have a fadal VTC 8030 with a Fanuc 18i that I am having what I believe to be an oscillation problem between my X axis motor and a scale. When the motor is quickly moved, or quickly...
I was just messing around with the 8030 again and when it alarmed out this time I got a 448:x axis: unmatched feedback alarm. It seems like the scale is not synced to the x axis encoder, but I am not...
Hello everybody, I am working on a Fadal VMC8030, when you move the x axis slowly there is no issue, when you move it slowly and speed up there is no issue however if you move rapidly or you quickly...
Thank you so very very very much!!!
I am hoping somebody can help me, this is for a friend of mine's brother in the army, basically this will be lit up with LED's, when it is on the men are ok for free time I believe. Anyway I don't...
LOL Thank you much sir!!!
Hey everybody I have been hunting and hunting now for a few days I am looking for a salmon dxf, anybody have one?
So I have been running a Wardjet now for almost 2 years it is a great reliable machine, however the downfall for this machine and pretty much all waterjets is the speed at which it cuts, a bit on the...
I have been running a Ward for just over a year, I would say we average 10 hours a day 5 days a week on the machine. It runs very reliably with minimal maintenance needed. We are running a 60k...
We run a Wardjet ZXL-2543 using IGEMS to write and Ikuhlu to run the jet. The software allows absolute control over virtually everything. I have been running this jet for just over a year now I have...
Thanks for the info, I just started running a Wardjet about 2 months ago, I did some polycarbonate a couple weeks ago with great results, then tried some .5" acrylic today with no so great results. I...