Search:

In my test g-code file I had placed a space before the semicolon in each line, deleting that space seemed to make the 10M happy. So now my little test program displays on the 10M screen, ironically...

I added missing "%" at the beginning and end of my simple test program, also changed hyperterminal to include a LF and now I get some sort of response from the 10M:

SR591 TV ERROR

Looking...

Hi all,
I am trying to use my Dell laptop to download G-code programs to our 10M based vertical mill with no success, perhaps someone can point me in the right direction.

Setup: I made a 3 wire...

Just a quick update:

With my current parameter settings when I move the X axis, 0.3937 on the position display the table moves 1.000", has to be a metric conversion going on that I just don't want...

We have yellow cap, brushed DC motors with 2000 ppr encoders (x-axis: A06B-0642-B011). So I guess that makes us "lucky".

Thanks for your reply I will google the brands and see what they have to...

Well we are still struggling to try to get our mill back to operational, I am fed up with the 10M, too cumbersome and proprietary for my tastes... Being new to CNC machining (personally and company...

So I found another thread on the forum that told me how to navigate through the menu structure and set the PWE bit... so that was one hurdle overcome.

I then went through all the values of DMR...

Thanks to everyone who has provided information on this thread...

Here is an update: I verified that the motor encoder is 2000PPR based on the servo motor model number. The screw pitch is 0.2...

Can you share the details of the chiller you installed on your machine?

What size?
Did you purchase it from Omax?
What are the inlet and outlet water temps or what temp are you feeding the pump?...

Hi all,
Through an untimely event of ignorance I managed to clear the parameter memory on my Fanuc 10 CNC controller (see other posts):confused:.

So we are on the road to re-establishing the...

Please bear with me as I am new to this CNC thing and "Thanks" in advance for your help.

So in case you missed it in another post I managed to zap all the parameters in my Fanuc 10M based (3-axis)...

We ordered a new Omax 60120-P3050V today!!!

I am thrilled as our Plasma table is fast but struggles on certain things, having both will be pretty sweet.
Mike

I e-mailed Hartford in Taiwan and they responded with two PDF files of scanned, hand written parameter lists, stating that they were not exactly for my machine but should be close. Probably after the...

Here's a little more information from the machine nameplate:

Hartford
model: M08-10MA
S/N: 8812080

Thanks,
Mike

The machine is an old Hartford VMC-760 (vertical machining center).

Going into IPL mode with "7" & "9" never brought up any prompts whatsoever, just the basic IPL mode menu with the 1 through 6.
...

Steve, thanks for your reply...

Yes we have been entering "6" and pressing the input key to attempt to leave IPL mode, that's when we get the error message and remain stuck in the IPL mode.

My...

I am searching for parameters settings for a Fanuc 10M controller on a Hartford VMC-760...

Any help suggestions or links would be GREATLY appreciated.
Mike

Hi all,
Today should be Monday cause nothing is going right...

Our 10M based milling machine developed an OT0001 error first thing today during the homing sequence. EMG and HND RESET are also...

Our plasma table (Burny 1250 controller) consistently cuts inside diameters undersized, as if it doesn't account for the kerf properly. The outside dimensions are fine. I have been trying to come up...