Hi Dave,
Don't bother looking up stuff for me on adaptive optics. I'm not going to get that deep into this. It has to be beyond my budget, based on the looking on the web that I did on that...
Type: Posts; User: rutexus
Hi Dave,
Don't bother looking up stuff for me on adaptive optics. I'm not going to get that deep into this. It has to be beyond my budget, based on the looking on the web that I did on that...
I forgot to mention, I live in Rolla, MO. Maybe this is too far away to be of any benefit.
Tom
When are you going to actually order them.
I will order two in probably a month, maybe two.
Have you used one of their 150 Watt tubes before?
Tom
Hi Dave, and Cnc Construction,
Thank you again for sticking with me on this project. Guys like you, who are willing to give so much info are a real blessing to others.
Dave, I printed out the...
We are not talking about 30-50W lasers. Tom wants to cut steel with RECI.
This is not real world.
Sir,
Yes, I am not talking about 30-50 watt lasers.
I guess you are saying that thinking...
Hi Dave,
Of course we have used Oxy-acetelene for cutting and many other fab shop uses in our shop for years, loosening bearings, cutting off bolts etc. I believe our equipment is equipped with a...
Thanks, Dave.
I did a little reading about the transverse modes (TM00). I have a lot to learn. Considering this, I guess you are suggesting that since the DC excited Reci glass laser tubes are...
[QUOTE=Melody-gweike;1230776]"
Hi, Tom,
It is possible but it has high demand for setting up skill and machine parts."
Hi Melody,
Thank you for your thoughtful response. I would like to ask...
Hi Dave,
I appreciate your comments. Could you be more specific on the issues that one needs to be careful with in using oxygen as an assist.
We do not plan to do this on a production basis,...
Gentlemen,
I am slowly building my first laser machine. I want to cut thin mild steel 18 ga sheet metal for our company. I am still working on the XY table at this point, but am planning for the...
Hello Rutex users:
I have not been over here to check this forum for a while.
The best way to get help for using Rutex products is to call me on the phone. (573) 341 1528. I have been...
Because Rutex LLC sells and has been selling servo drives to the CNC industry for about ten years!
Splint,
Now I'm even more suspicious of your power supply. Please fax me a schematic of the power supply. Fax: 573 341 2672. Put to Tom's attention.
Tom Eldredge
Hi Splint,
I think you get the prize for spending the most time working on your problem. I wonder whether you may have damaged the boards with your power supply. If the secondary shared any...
Wow,
You are certainly having problems getting set up. Thank you all for your help in this problem. I am impressed by the advice given.
In supporting Rutex drives for the past 4-5 years or...
All,
Yes, Rutex is still in business. I have been selling, shipping, and supporting Rutex products steadily since November 2007. For six months last year, it seems as though the home office in...
Gentlemen,
I thought I should let you know what I have in stock:
R2010 drives, encoder adapters, mother boards, and chasis for the whole set ups. So, you can build complete Rutex servo systems...
Gentlemen,
Rutex has had its troubles over the past year. I have had difficulties in trying to communicate with the designer and owner of Rutex in Australia. Vladimir has not given me an...
Gentlemen,
Rutex has had its troubles over the past year. I have had difficulties in trying to communicate with the designer and owner of Rutex in Australia. Vladimir has not given me an...
Gentlemen,
Rutex has had its troubles over the past year. I have had difficulties in trying to communicate with the designer and owner of Rutex in Australia. Vladimir has not given me an...
US Digital encoders are good and reliable. If you get the single ended encoder, our little R2210 adapters make hook up very easy. You hook up 5 wires to the adapter and plug in a shielded cat5...
George,
I'd use the pixie's. I am out of stock on the R2020's and do not have a restock date yet. Vladimir is working on an upgrade for them.
Tom Eldredge
Rutex LLC
Hello,
Can you please tell me if I can use Rutex R2020 servo drive with Fanucs 20M servomotors?
Stats for this motor are the following: 23Nm TRQ, 18 Amp, 2 phase 213V 1500RPM motor.
Thanks.
...
The KL34-150-90 will run ok on the R2010 drives, but I believe the -170 is a little too large for that drive. Unfortuanately, I'm temporarily out of stock on the R2020 drive that it would need. I...
Eric,
Please correspond with me at [email protected] regarding any specific orders. We shipped a parcel to New Brunswick, Canada via EMS mail on Feb. 12. I would have thought you would have...
Gentlemen,
Most of the time the break out boards add complexities to the set up. I try to discourage people from using them. The Rutex system was designed to be simple, and it works best when...
Gentlemen,
I was able to make contact with Vladimir last Thursday via telephone. He reported that his phone service was preventing him from receiving incoming calls for the last three weeks or...
Gentlemen,
I do not know where to find any more of these motors, but occasionally they show up on ebay. I am responding to an inquiry here.
Tom Eldredge
Rutex LLC
Gentlemen,
I don't know what is with the email address. I answer emails every day at [email protected]. Try this email address: [email protected]. It does not go through the Rutex.com server....
Gentlemen,
I don't know why anyone would have trouble contacting me. I answer emails every week day at [email protected] and I am available at 573 358 7399 by phone, 573 341 2672 via fax, and cell...