Hello Everybody,
Been a long time since I been on here. I have a bunch of tool holders that I have listed on Ebay.
Bridgeport BTC1 Tool Holders | eBay.
If you have any questions please...
Type: Posts; User: Builder
Hello Everybody,
Been a long time since I been on here. I have a bunch of tool holders that I have listed on Ebay.
Bridgeport BTC1 Tool Holders | eBay.
If you have any questions please...
http://www.edbrown.org/wordpress/
I've been following this real close
Kevin looks GREAT, when is mine on the way:cheers:
Wow I have never seen such poor response for an RFQ!
Unfortunately I don't have the Heli, this is a personal project. I like the looks of that heli but there are somethings I wish to change and make my own. If that makes sense.
Tony
It is full size rough dim. in first post. As stated there are some changes I will make from the photos such as the tail rotor, a more simpilar design. It is a personal project that I'm going to...
Yes Mastercam, you can do it in Solids because I would convert it to solid in MC anyways. Fun project is exactly what it is.
Tony
Yes, but my main concern is from back of cabin door to back of cabin door across for shoulder room should be 60" and let the rest fall into place. I have plenty of photos to illustrate
Need 3d wire design done from image, able to open in MC so 5 axis cam work can be done. 60" wide, 50" high, 168" long, all measurements are rough. Image is shot on all sides so you have a visual...
Where is it located?
I hope it wasn't the machine off Ebay. Tooling is almost impossible to find!
Tony
Hello all,
Kevin, asked me about my spindle speed since I increased it to 6500 RPM. I told him so I'll share with rest of you.
I installed a Safetronics 3P7 5 hp VFD 3ph in/out in between the...
vebers,
Here is a video link that Grifftek posted on another thread of a retrofitted BTC 1 with a AHHA controller. You should give him a call his # is in the video.
http://tinyurl.com/a6a8p
...
It must be me, because I tried my all three of my son's computer's and my wife's. Still nothing, On the exe.dxf files it cannot find the site, and the zip files it says the file is invalid or...
ger21,
as like rob, I am unable to download the dxf files any ideas?
Tony
Hello
I have a Series II Interact II in need of a new Y axis screw. I don't see anything on Hiwin site (unless I'm blind), anybody know where I can aquire these? Am going to change X while I'm at...
machintek, sorry about that. It's [email protected]
machintek
Do you think I could get a copy of this bulletin also?
Thanks Tony
I think I have the board you need, let me check the numbers on monday to make sure. Bought three of them as spares and I know they work because i put them in my machine to check. I'll let you know.
...
Hello All,
I just recieved this machine and need to do a retro on it. I am including a link to the machine since I can not get the photos in here.
...
Al
Thank you for your response, but all those boards are jibrish to me. Also reading about the software it doesn't seem compatable with the programs I've read about on this forum. I could/probably...
Hello
In need of information regarding this type of set up. Designing a 4'x16' moving gantry. The Gantry will be about 200-250 pounds, Thk blocks and rails. How would I size the servo's? What...
Gentlemen,
Thank you for your responses. The ajax machine is a little small for what I want. But the CNC setup looks interesting. Ajax has retro kits for Bport clones for a little more than what...
Hello All,
I am a new to this forum and seeking opinions on a Bridgeport clone with cnc already in place. The model in question is CNCMasters Supra Mill ...