Samguyjes,
don't see the image, i had the same with my blue elephant machine. it reached the limits, also had to set the ATC forks an height measurement 10 mm back, causing that the spindle could...
Type: Posts; User: joey666
Samguyjes,
don't see the image, i had the same with my blue elephant machine. it reached the limits, also had to set the ATC forks an height measurement 10 mm back, causing that the spindle could...
Well Frank,
Got things working! The ATC .info screen can only be used in my case for 10 tools. T11 and T12 i have to register with G991T11.
Had the Paramext.ptx file adjusted to allow for pr3409...
Hello Frank, i've experienced that is indeed difficult. But got the airblow working. Got the tool change and length measure macro adjusted for 12 tools. Also got it mechanicly set up. Only thing...
I see, 900 series is different. Sorry have no experiance with then as i don 't have pr600 for tool positions.
Did you made a full backup? do you have a syntec 6mb?
I think there should be a folder in the backup called macro.
I think that has to do wih the T0000 macro tool 9-12 are not defined. Can you share your full backup?
Can you add T9-12 to ATC INFO screen, thats what i can not change higher then T10.
Hi,
just in the making of converting my 8 position tools to 12 position tools.
First check in parameter 3409 if you set that to 10 it might work out.
Had the same probleem with restore. And did it the same way and managed to get 10 tools working now.
Updated the paramext file pr3409 to 0-20 instead of 0-8.
Now when i input 12, the ATC INFO...
Thank you Frank,
the manufacturer will help, he needs some one from Syntec to change it.
The macro's changed already. I am able to put in 10 on the ATC.info screen and with the new macro it will...
Well good to find this thread!
I am to had the air blast changed by just bypassing the solenoid and went in straight from the regulator to 4 bar inlet of the HSD spindle.
Since it has to be...