HI Mark
I have only just read your post .
Are you still needing help with Xilog?
All the best Timberman
you can email me on [email protected]
Type: Posts; User: timberman
HI Mark
I have only just read your post .
Are you still needing help with Xilog?
All the best Timberman
you can email me on [email protected]
I can easily show you how to write Parametric programes
They are so quick.
is this a flat bed machine or dose it have pods & Bars?
Timberman
Hi There
I have have 6 years experience on my last CNC Machine Record SCM 110
I have cut Mdf,Aluminium, Poly.etc
If you need a help with cutters or holding work down
I could be your man
Many...
if you need help with Xilog I may be of some use to you.
I have been programming using Xilog plus for 4 years.
I specialize in parametric programming as well use xilog
I have been operating a SCM...
you have to measure the tool diameter & enter it into your tool file so whats the problem
The cutter you should be using is a sprial downcutter
always cut in 2 passes 1st pass 5.5mm 2nd pass 6.1mm
hope this helpes
Hi There
Why don't you write a parametric program instead of a macro
I find parmetrics are great.
just a thought
Timberman
I have a copy of Xilog plus here that should give you all info you need.
I also specialize in Parametric programming In Xilog.
I know this is an old post but if you still need help I programe inxilog everday & make 100's of Parametric programes
If this is any use
Hi There
It is code if it was our machine
We would use XA2P for a curve & Xl2P for a straight.
You should have 1 start point & stay down all the time on a curve.
Hope this is of some use...
If you dont find a copy of Xilog I think I have an old 1 here or I could send you the help file.
I could also send you same sample files
All the best
Timberman
We Use microvellum
This gives you a motice & tennon joint where rails meet sides
Where back meets sides & divisions meet bottoms
You can with 4 tick boxes turn on or off
Butt joins
Butt joins &...
HI There
I use Xilog all day on our SCM record 110 aL
If you want any help programing Just contact me.
I think you can download trial versions
All the best
Timberman
Hi There
I am useing Xilog for code on our SCM machine.
We can start & stop anywhere in the code by useing a GOTO comand.
Can you use this
All the best
Timberman
For me to get DXF files into Xilog I do the following
Open your DXF file with Xilog & a window asks you about your size.
You put your requried X & Y measurments in & you will have to scale your...
You will get ridges if you are useing throw away knives on you cutter.if you are like we do the need to be setup perfectly flat.eg sit the cutter head on a sheet of glass when inserting new cutters....
If you have xilog you can do all the programing under the code in that programe.
I use it 5 days a week.
You can use Xilog to do all your programing & even make your programes parametric( type in the size you need.
You can't nest with it though.
I use it all the time & have written over 80 programes...
Hi All
I am try to use V Carve pro
It seems to be a great programe but I cannot find a post processor for our SCM Actioline
I need to open the file from V Carve into our Xilog Plus editor
I have...