Search:

We have a Muticam 3000 CNC router that we expertise for research and educational projects. As most Muticam products the machine is always busy. Two days ago we had an unforeseen mishap when one of...

Hi,

I have a huge problem. Im from a University in South African and we have a multicam 3000 router and someone dropped the controller. Now its not working. Any help on finding spares or...

Hi,

Please can you supply company details and what will the approximate cost be to replace and install a new encoder.

Thanks,

Ugan
[email protected]

Hi there,

I have a Multicam 3000series CNC router with a 250mm Z. We often Machine large MDF/supawood moulds that are 100mm deep, with long endmills and ballnoses. We have a huge problem with dust...

Hi there,

I have a Multicam 3000series CNC router with a 250mm Z. We often Machine large MDF/supawood moulds that are 100mm deep, with long endmills and ballnoses. We have a huge problem with dust...

Thanks for the help guys!! much much appreciated!!! The machine is up and running. I only need to replace the racks and pinions!

Regards,

Ugan

Hi,
The racks and pinions were cleaned as to identify the degree of damage. It was greased however I never cleaned the racks. The build up of carbon dust over the years could easily wear the racks...

Hi,

Depending on projects the machine works average 6 hrs a day. However we specialize in composites so we machine a lot of Glass fibre, Carbon Fibre and MDF (supawood). However I believe that the...

Dear MCPservice,

Thank you kindly for your assistance. Our local dealer managed to have one motor in stock, so our machine is almost up and running. However I do have two motors with blown...

Hi,

Please find pictures attached of the CNC servo motor. The details are as follows:
1.MOTOR DETAILS
Manufacturer: MCG
part no. 3483-ME4697-F
MFG code: 001882 0705
Cust no:34-00007-00
...

@MCPservice: Nooo ways!! MCG have stopped manufacturing these motors. Have they got a brand new replacement motor? The problem is that I'm in South Africa, Durban. I need to weigh the cost of a brand...

Hi,

Thank you kindly for your response. I am unable to home the machine.

Firstly I unbolted the motor from the gantry and tested it without any load and it still gave the error. Then I swopped...

Hi,

The Multicam was fitted with a Chinese MCG motor (Part no: 3483-ME4697-F). It's seems that the encoder (absolute; model:CC) is manufactured with the motor. I have tried to source the encoder...

Hi,

The first time I homed the machine there was a blink count 5 ( tracking shut down, tracking limit exceeded, confirm feed ok for bit)

and I recently got a different error: blink count 7...

Hi,

I work in a university and we have a Multicam 3000 CNC router. I managed to troubleshoot that one of the two X-servo motors is faulty. When "homing" the machine, the motor turns but bombs out...

Hi,

I work in a university and we have a Multicam 3000 CNC router. I managed to troubleshoot that one of the two X-servo motors is faulty. When "homing" the machine, the motor turns but bombs out...