Search:

**SOLVED** Thanks for the replies, I have solved the issue with your help. It was parameter 184 spindle voltage min - max 0v - 9.999v. I inadvertently input .999v when in fact the parameter called...

Team,
Update…I have tried to modify several machine parameters with no success. MP 62, my mill is set to “5” I tried all variables 0-5. This did have the spindle turning much slower, just not...

Probably the largest tapping I do is 1/2-13 or 12mm. I also do alot of stabbing and reaming for precise hole locations. The book I have from the owner states rpm range 40 4000. I attached 2 pictures...

Rigid tapping...

So far owner I bought the vmc from states no gear changes were necessary. I modified the parameters to match the new number I thought would work and same result. The owner did state that wasn't sure...

I just looked at this page this morning and I am going to try it later today when Im off work. This is what I came up with looking at that page. The bottom numbers is the new number im going to put...

I only have a maintenance manual with has a lot of info just not specifics of the motor. The spindle will turn up to 4000 I verified that yesterday it just wont go below 399 i verified that too....

Bridgeport Interact 412 Spindle RPM Mystery

I recently purchased my mill; it is of 1987 vintage. It has the Heidenhain 151Q controller, Bosch drives, and Fanuc spindle. I have slowly been trying...

Did you try creating a curve and between your objects and use follow curve?

Thank you Jordan for the download!

Do you have larger versions of these files? They are not legible and zooming in makes them more blurry. Thanks