Hello,
I'm new with plasma cutting , maybe someone can help me.
I bought a chinese router with plasma Huayuan Welder LGK-200HD power source and I'm trying to cut but with very bad results.
I need...
Type: Posts; User: Rukam22
Hello,
I'm new with plasma cutting , maybe someone can help me.
I bought a chinese router with plasma Huayuan Welder LGK-200HD power source and I'm trying to cut but with very bad results.
I need...
Hi all,
I have a lathe and I get alarm SV0409 Detect Abnormal Torque (X).
I changed the end bearings but still I have same alarm.
I get alarm in rapid and if I change from 25% to 50% or 100% the...
Hi,
I have a lathe with MITSUBISHI M70 and I have problem with my turret. After 20-30 minutes I have alarm "turret fault". My servo driver for turret is MR-J3-100A-RJ and when the alarm appears, on...
I have a milling machine with Fanuc 0i-MF and I want to stop my machine when my tool broke. I use drills with inserts and when they broke they damage my tool. Is it any possibility to stop the...
Hi , I want to collect data(informations) from my CNC milling machine about : status of machine, how many hours was running(cutting), status of signals, load on servomotors, etc.
I want to connect...
Is only STRT and at distance to go 0
Hi, I tried with G80 but still is not moving to next line
I have a lathe with Fanuc oi-TF and I'm trying to make a thread and is not working.
My program:
G40G80G97;
G00X0.Z2.S200M3;
M29S200;
G84Z-20.R2.F2.;
G00Z10.;
G28U0.W0.;
M30;
Hello,
I have a CITIZEN B12,year 1999, with Fanuc controller and I cannot find the problem with 1000 Emergency button pressed. I checked 24VDC circuit, switch limit, emergency button, etc., and...
Hello,
I have a lathe with Mitsubishi E70 controller and I want to read end of bar signal(from barfeeder) in my case is X205.
When it is on X205 to call a subprogram in my main program.
Some help...
Hi,
Motor power cable-ok
motor insulation-ok
phase-to-phase resistance of the motor-ok
I didn't change any parameters.
Hello,
I have alarm SP9012 (S1)SSPA: 12 OVERCURRENT POWER CIRCUIT from Spindle Amplifier aiSP15 A06B-6141-H015#H580.
I checked:
-power cable from Spindle Amplifier to Spindle Servo Motor and it is...
Thank you for your help.
I solved by changing parameter 5200 #4 DOV from 1 to 0 and now the feed is same for both directions.
Hello guys,
I have a milling machine with controller Fanuc 0i-F.
I'm trying to make a thread but when is reversing out the feed is faster and speed is same and my thread is not good.
My progrram:...
Hello,
I have a lathe with Siemens Sinumerik 828D Basic, and I want to program only with G codes. Some off the G codse like G71 it doesn't work. I cannot use U for X and W for Z.
How can I activate...
Hello guys,
I really wonder if anyone could explain to me the barfeeder subprogram code, I would be really grateful:
O9001
IF[#1002EQ1]GOTO20 - where I can find this in my controller Fanuc?...
Can anyone help me with parameters for spindle load meter to be show on my program check screen? Controller 0i-MF.
Hi, can you help me with the parameters that you change to display spindle load meter on the check screen?
Hi,
I want to to change my sub program for bar feeder and I need some help.
Right now after feeding the bar is finished, the spindle starts, but my push road is still inside in spindle.
I want the...
Hello guys,
I need to measure with laser the accuracy for a grinder and to compensate.
Grinder is with linear scale from Heidenhain for X,Y and Z axes.
My questions are:
To measure and change...
The controler is Fanuc 31i model B
Hello guys,
I want to modify parameter 3772 from 12000 to 30000 because I use 2 different motors, with G10 in program? I don't know how to program.
System-PMC Maintenece-Data-Imput-and I search my line for tool in spindle(you need to finde comment SPINDLE TOOL) and after that line I had tool number from 1-24. I take out all tools from magazine....
Thank you, I solved!
Thank you but my big problem is that I have 2 tool pots broken
Hi guys,
Can you help me how to disable a tool poot in the tool magazine? Because I broke the tool pot and I don't want to use it anymore.
Controller is Fanuc 0i-MF
Magazine is with 24 tools pots.
Hi guys,
I need help to set-up both-direction pitch error compensation on a grinding machine.
Controller is Fanuc series 31i model B.
The grinding machine is with linear scale(encoder) from ...
Hi all I want to know what I need to check every time on milling machine with Fanuc control when I go to troubleshooting and repairing?how to troubleshooting? Hot to check errors? How to modify...
Hi I have a Bar feeder LNS DH-65S2 that I need to do a program for lathe Ace Micromatic LT-2LM500 Elite with Fanuc controler. I need to make program for feed and for bar change and I don't know...