Hi All
Can someone help please?
The lathe had a problem with the chuck drive motor, which was removed for repair. Whilst the motor was removed the power to the machine was turned off and yes...
Type: Posts; User: audioandy1762
Hi All
Can someone help please?
The lathe had a problem with the chuck drive motor, which was removed for repair. Whilst the motor was removed the power to the machine was turned off and yes...
David
Lucas has not been involved with the YAPSC for some years due to time constraints.
He walked away from the project at around the time I was looking at them that's why I looked into...
Hi Jack
Glad to hear you have sorted it.
Learning all these new skills keeps us older ones young!
Regards
Andy
Hi Jack
I know this might be stating the obvious but it sounds like it might be one of the settings missing in your motor setup tab.
If the motor works with your X axis, then just look at all...
Hi Lucas
Are you going to be selling your boards?
Well done on getting a working system :cheers:
Andy
Hi
All the boardsI had have now all gone I may re order at a later date if I do I will post on here.
Regards
Andy
Hi
Please Pm me with your details and I will get back to you with a price and payment details.
Regards
Andy
must type faster ; )
Hi Simon
Give this company a try Milling Cutters | Milling Cutter | Machine Taps. If you give them a ring and tell them what you are trying to do they will give you some good sound advise and the...
Hi Philip
At the moment I have 9 x YAPSC and 2 X Progkey boards left and yes these are the latest version.
Let me know via PM if you are interested and we can sort the payment details out.
...
Hi Everybody
Sorry for taking such a long to get back to the thread.
I have 12 spare bare YAPSC boards and 3 spare bare PROGKEY boards, if anybody is interested please post your interest on...
Hi
I havn't forgot about this order I have been so busy with work.
Will try to get the order sorted before the weekend and post a delivery date on here.
Andy
Ok
Yhe latest list is as follows:-
Aluplastvs 10 x YAPSC 10v
FAXed 3 x YAPSC 10v 1 X USBprogkey
bobgerman 6 x YAPSC 10v 2 X USBprogkey
AlexDion 3 x YAPSC 10v
Kenski 3 X YAPSC 10v 1 X USB...
Hi yes if you look at the post above you should see your name with order at the side.
i will update the list as people add their requirements.
Regards
Andy
Ok
I will start the list 18/10/2011
Aluplastvs 10 x YAPSC 10v
FAXed 3 x YAPSC 10v 1 X USBprogkey
bobgerman 6 x YAPSC 10v 2 X USBprogkey
AlexDion 3 x...
Hi All
I have had a few requests for the YAPSC 10V bare boards can everyone who is interested please post on this forum how many boards you require of the 10V and if you require the ProgKey board...
Hi Dan
What I will do is have a look at mine and check the parameters, I'm sure you have to enable the relay (it's that long since I set mine up) and give you a step by step.
andy
Hi Dan
You can use one of the relay outputs on the VFD to turn on your water cooling no problem at all.
I have mine running this way.
Andy
Hi Mike
Head over to here and ask the same question you might get some help.
MYCNCUK
Andy
Hi Bill
Yes these boards will enable you to use your servo's with Mach.
I have only three YAPSC boards left and one of the USBprogkey boards.
For more info and parts list etc first download...
Hi Bingbang
If you are looking for someone in Europe to supply a new BOB have a look here
OPPB
I don't use them myself but have read a lot of good reports from people who do and the guy is very...
Hi DssTvDummy
I have some bare PCB's on the way,I am going to see how it goes and may offer built and tested boards if Max is ok with it but if you want to roll your own I have some spare boards...
Hi
Did you get sorted?
If not have a look at this thread, I am currently trying to get some boards for this project....
Hi All
I have had contact with Max and I might beable to get hold of some of the PCB's but these will just be the bare PCB's.
If anyone is interested can you please let me know, if we can get...
Hi John
I have had contact with Max, he no longer has the time to continue with this project, however he has told me that all the info needed to make the boards yourself are on the website.
If...
Hi Diy
I would if I was you,the last thing you want is any water pipes or cables snagging in the middle of a job. I have cable chain on mine which like you has the power cable and water pipes...
Hi Everyone
Has anybody successfully built and has a finished working YAPSC:10v board from using the files on Max-Mod’s website.
I have tried to contact Max Mod but to no avail.
Thanks
...
Dougie
What cable are you using from the pc to your breakout board?
Have you checked that ALL the pins are connected if you can buzz out all the pins from one end to the other just to prove...
Douigie
I would avoid any daisy chaining, not sure what you mean by the pulse being daisy chained.
Andy
Dougie
Looking at your photo's it looks like you have some "Daisy Chaining"
of the cables going on can you confirm which wires are coming from what and going to
where.
Andy
PS where...