Search:

Hi
I have the following problem with my Siemens control system 3. Until recently it ran without problems, it was one of the cards that suddenly shows a periphery fault and I could not approach all...

Hello,

anybody here who couldsend me the utilities for this controller at binary code?

This would be very helpful for me. Thanks.

Hello

I’m looking for someone who works with this controller for the purpose of exchange of experiences.

Greetings

And where should I insert G97?

I work at a horizontal rotating table Roettler with Siemens 3T.
The table doesn’t want to start in the automatic mode. In JOG mode it works to the right and left.
I programmed
N5 M04 S50
N10 G90...

Hello everybody

I’ve got Rottler’s vertical boring and turning mill with Sinumerik system 3. I connected it up and wanted to move the table. I don’t have any problems with X and Y axes in the job...

Great

Thanks in advance

I started my machine and would like to program now. I’ve got a manual guide therefore. But it’s described very difficult. Does anyone happen to have a list of all functions in written text as a file?...

Hello

Could anyone tell me how a zero point for tool change should be determined? I know that the spindle has always to have the same position therefore and is controlled by Ini. We’ve got a...

Thanks for your help!

Hello

I’ve got a mahomat that I’d like to put on stream, but there’s the error E171 occurring. I don’t have any documentation because I bought the machine second-hand. Could anyone suggest what...

Hello people
I have a Maho with Philips 432 and I have the following problem. I changed the float battery and since then the controller can’t be normally started. It seems to try to reboot all the...

Hello people!

We have an old Maho with CNC 432 Philips controller. And we’re searching for the float battery. Could anyone describe where it can be found? The problem is that the parameters go...