Search:

Thanks,

I checked the powermate & it probably won't work as i need the G107 pipe code to control/overide the A axis speed properly.

I'm not chasing the option paramaters here, im really just...

Hi Fordav11,

Thanks, i have been discussing this with 3 technicians.
I can't work out why the 6th axis is not availble, the "Dimm' axis control card must be 6 axis as the machine is currently...

Hi Fordav11,

Thanks for your reply.
Paramater 3115 has 5 Axis listed
X,Y,Z,X,B (Bit 0 for the second X is 1, to hide the axis as you said).

The back plane board has 4 slots, 2 are used
Slot...

Hi All,

I'm hoping ther are some guru's out ther can can help me out.

I have an Amada FO laser with a Fanuc 160i-L control.

Machine has 4 programmable Axis (X,Y,Z,B) but the control is...

Hi,

You read the power output from the CNC monitor or the LED panel on the booster side of the resonator.

What is the resonator type or P/N? and output power?
It needs to be in open loop...

i would not touch a morri seiki,
we have 4 okuma lathes and 1 okuma mill(oldest 5 years and only ever blown 1 power supply)
and i mean we mass produce parts 24 hours/5 days,they don't get switched...

hi all,
i live on the central coast n.s.w.
projects-
cnc laser cutter-home built tube runs great(motion system on hold)
cnc router-full steam ahead with this project-almost complete.
i have...

i use a brushed ac motor speed controller for my router,i slow the rpm down to lessen th noise.works great.
i got it in kit form from my local radio shack.minimal parts to solder.

hi all,
here's a solids works design i have spent tons of time and cash designing around all the parts i have purchased to buld this mill.
any opinions would be great.
basic details
about 6 foot...

sounds like a very powerfull rotary tool spindle motor.
i have tons of experience with programing/setup okuma,hitachi,,and lots of other cnc's with rotary tooling.
max drilling dia with rotary...