Search:

For servos, does Kflop do better with velocity, or torque? I presume feed-forward is implemented. Are complex trajectories like cubic spline a matter of using custom c code? If I wanted a command for...

Well I checked the webpage and that is what kmotioncnc is for!

Can a g-code file be loaded directly into kmotioncnc and executed? (no need for mach then)

Ya will probably try to get some photos once I get past the hardware buy stage. Then I can combine another hobby I love, photography. So far all my used servos and drivers work :) . With the Galil...

x,y,z - 4 axis (slaving either on x or y), lathing/rotation =1 axis, spindle (servo controlled) =1 axis , 2nd rotational axis =1 axis. 1 extra axis for second spindle or maybe for tool changing or...

Now it looks like I will go with galil 4080 and maybe Mach4 when the post processor for Galil is ready . No advocacy for kflop on the Dynomotion forum!?

What I would like is a controller with...

If it is true that Linuxcnc wants a real-time connection to the motion control board, then I don't want this approach. I want to let the host send info in a non-time-critical manner by buffering high...

Will check out Mesa cards. And will take a closer look at LinuxCNC. Haven't used Linux in ages.

I am now thinking that velocity mode is the way to go. It seems that is preferred over torque mode...

Hi All:

I am building a new mill from scratch, and will be converting a PM25MV when I can get one in.

I will be using high precision ball screws (hard to source reasonably off ebay), and I...