Hi,
Uli maybe you read this, you asked me about EasyMark installation, I can help but your PM is blocked :-(
Best regards,
Martin
I did send you a visitor message
Type: Posts; User: Martin1967
Hi,
Uli maybe you read this, you asked me about EasyMark installation, I can help but your PM is blocked :-(
Best regards,
Martin
I did send you a visitor message
Hi,
The fiber look really bad... Best thing is to try to make a better cut with the special tool.
Best regards,
Martin
Remove the fiber cable and take a look, Now it is not working anny way.
the tool should be easy to find local/online.
I am located in Rotterdam
Best regards,
Martin
I wil leave the discussion for a few day's now I have a big job to do and leave for the weeken.
Try the fiber thing and we talk next week
Best regards,
Martin
Pytron has nothing to do with the laser, that is an external moving axis that you do not have.
I looked at IMG_20160428_121216.jpg and saw 1064 nm this is strange, can you remove the lens and make...
You see only one light, but it is a comunication fiber that transmit information at 30Khz puls frequency.
Maybe you can ask him for info of the service history of this laser ??
"keep the cable plugged into the computer and tighten the screws and then just loosen the center screw of it and move it back and forth in and out and watch the screen for any changed"
That is...
Yes they can be re cut , Ideal you need a fiber kabell cutter tool, it is a smal kind of knive with holes in the site '
Cutting with a exacto knife is possible but not easy to get a straight cut
...
The bright one is the LED sender, the other one is the return light from the head this is weaker it is a reciever
Try to move around and also move the cable it self to different positions It takes...
Temp not oke wil leave after few minuts when head heats up. There is a heating element inside, no problem...
Plug it in without closing the cover, screw it in place so it can not drop out
Loosen the center screw and move around till LED is off
Close the working axis and leave it, only move the non...
Can you move with the plug in the PC ?, power off the system when removing and puting back the SDHC connector !
See posts before
I can not see it clearly :-)
What i can see is that the bottom...
Becarful, there are 3 screws , remove the outer 2 to get at the center screw that is unther the wires
Leave the window open , it works in realtime
Looking at the pictures, it is hard to see, just try it.
I think you should adjust this.
It is the only thing you can do
Sometimes on verry old sytems, I do the folowing:
-Leave the plastic covers of
-Remove the cable holder part and leave it of.
-Make shure the plug is in with both screws so it can not drop out....
As for the LED's, are you referring to the power supply lights for the deflection head or that box with the three led's? What appears to be happening is that if the cabinet is moved around the...
The second sugestion is a bit more difficult.
I saw that the head was disconected from the cabinet during transport.
If you remove the plastic coverss of the SHDC connectors You can see that the...
Sorry about the double questions, but I just found out that my popup blocker works a bit to well :-)
The galvo thing, if it is broken, you get more led's..
1 test:
Shut down the system, open PC ...
Oke,
I saw som screen shots from Setup.
Deselect the X and Y axis, this is for external axis
At CO2, click on standard functions
The parameters are strange, but you are correct they...
No raster info is not relevant
What deflection head error ??
Press in monitor on the defl, head.
This opens a test screen for the head.
Do not press x test or y test, this is for a special...
Hello Xavior,
You have found the correct info :-)
Your field is a circle with a diameter of 70mm ,and scan SMG 10 A128.pdf shows the sn. of the system But is a older number that is not on the...
Now I see the screen shot,
Your system is working !!
Light on the cabinet is probably broken...
----
Now you should read the LaerCad manual and start marking.
Use the program : Control...
No number in your documentation...
Here is the picture for the ILK, do you have this red light with the grey cable ??
http://www.cnczone.com/forums/attachment.php?attachmentid=318270&stc=1
...
I have here about 20Mb of pdf's how to use LaserCad and laser engraving with our lasers in general.
Can I upload to your app.box ???
No, these are not the label I mean.
It should be something with Baasel on it and the amound of power it uses and voltage etc.
Is there no backup of the old installation of this PC ?? the file...
Oke.... :-)
It is not a problem, but settings are now back to factory defaults.
Your version of LaserCad is a bit older and did not have that option I think.
Can you set the system now to Co2...
This is where to change the IRQ , sorry it is a Dutch windows :-)
And I do not have a com 3 ! Just to show you where it is in WinXP
...
This should be the setting in serial port in the program parameter
http://www.cnczone.com/forums/attachment.php?attachmentid=318264&stc=1
Hi Xavior,
I hope this picture works :
http://www.cnczone.com/forums/attachment.php?attachmentid=318262&stc=1
To add the device, I always click a bit to see what to do.
Win98:, just add a com...