Thank You!!!!
Dan
Type: Posts; User: Dreamaker
Thank You!!!!
Dan
Thank You!!!
Dan
Wanted: Legal copy of RhinoCam 1.0 for hobbyist to puts around with.
Dan
The name on the CNC is "CNCEST" Here is a pic for a start, I have to open the box to get the rest of them.
Thank You
Dan
...
The booklet that came with the CNC Engraver/Router has nothing in it for setting the VFD. It would be nice to have the G-code control the spindle speed or adjust it in Mach 3. Also would like to see...
After doing a little checking, I think what I am trying to say is I need to find out how to set the codes in the my VFD.
I am not talking about the g-code used to run a job. Maybe D-code and P-code is a bad choice of words. In the video it was a different controller, so in the touch pad readout it showed a "P" with...
Does anyone have one of these CNC Router 3040 4 axis Controllers (CNCest Brand) If so, Do you know how to program the D-code on the controller box pad. That is if it can be programmed. I just...
I am not sure if I understand what this is for, or its function. Sorry, I am just a little confused.
Thank You for the PDF files. Looking at the PDF and trying to make sense, something occurred to me. I bought the CNC Router off of EBay and as I researched for the one I needed I picked the one I...
I finally opened up the controller box, here are the images of the main board. I don't know what the "MI#" connectors are for, also I think I shot the wrong...
I don't know if you are considering Mach3/4 or not, myself I like it, just a couple things could be better, but I will find the answer. Mach3/4 works only with 32 bit OS and uses the parallel port, I...
Tomorrow I will open it up and see what I got. I didn't want to open it up blindly.
Also do you use MACH3 controller software? If so, can you control the spindle speed with the software, I use...
Anyone familiar with this Chinese 3040 4 axis Controller box, if so is it capable of limit switches?