If you are just doing 2D work, Sheetcam is very effective.
Type: Posts; User: ploughex
If you are just doing 2D work, Sheetcam is very effective.
Hi, I am an engineer who spent most of his working life designing and developing hydraulic brake systems, The normal maximum design pressure of a brake system is 1500psi. Clutch systems run at a...
I found that the problem was purely a mechanical one. I replaced the stepper with a 4.0 NM torque motor and there was an improvement but still a little problem so I changed the motor pulley to the...
Thanks I have adopted the DPDT relay and it appears to be working ok at the moment.
I have tried the capaitors. In the Mach 3 installation manual it recommends external limit swicthes for larger machines but does not say how to feed back into Mach 3 to switch it off in the event of...
I have tried all the usual "cures" but still had problems. Now with no limit switch connection to the BOB they cannot feed back to stop mach 3.
I am running Mach 3 on a mill. After having had many problems with false limit switch triggering I have now disconnected the limit switches from mach 3 control and have them now operating at 35...
I have converted a Chinese round column mill/drill to CNC operation using NEMA 23 steppers (3.1NM torque). I have encountered a problem with the X ais which I would be appreciative if someone could...