Search:

Hello,

Does anyone know of any software that will engrave 3d molds, of an object? Need to be able to splice the object into top and bottom halves. Then mill the inverse, of each half in...

Does anyone know where I can find g code, for cutting, with a 5 axis saw? Specifically, how to make a curved cut or angle cut, with a saw blade. I'm using Mach3 to run the machine. Need the blade...

Does anyone know where I can find g code for cutting with a 5 axis saw? Specifically with, how to make a curved cut or angle cuts, with a saw blade.

I am looking to convert a mill/drill to cnc. http://www.use-enco.com/CGI/INSRIT?PMAKA=105-1132&PMPXNO=953978&PARTPG=INLMK32

I had thought of using stepper motors, but the more I search the forum,...

Does anyone know the best place to buy servo motors at a decent price?

Emailed them already they told me:

Sorry we do not have the parts you are looking for at this time.

I'm using 4 motors. Two wired parallel, to drive X axis gantry. They are bipolar 4-wire.

Does anyone know where I can find a power supply for a stepper motor with a rated current per phase of 6 amps DC?

I'm looking for a power supply that's off the shelf. Not home made.

Gecko drives. Problem is finding a power supply rated for the 6 amp motors.

Does anyone know who makes a power supply for the following stepper motor?



Holding torque-Nm (oz/in) +/- 10% 8.7 (1208)
Rated voltage 2.7
Rated...

Shaped carvings for monuments. Grapes, leaves, hands, etc. Mariss at Geckodrive says; To synchronize two motors, use two drives with the STEP and DIRECTION lines in parallel.

Slow speed would be fine for me since the bits can only cut so fast. About 6-8 in/min. My problem is move a 500 pound gantry. I planning to use 2 1200 in/oz stepper motors to drive this axis. ...

I appreciate everyones help! My machine does need the ability to turn off and on the main motor for the milling head as well as turning on and off water for the diamond bits. The reason I mentioned...

Perhaps I'm wrong. I'm trying to make sence of the electronics for cnc machines. My understanding, from the seaching that I've done, is that the controller board controlled/regulated the motor...

Is this board capable of handling 6A 1200 in/oz motors? Are these boards ones that I build myself? I'm fine with using parallel port. I like concept of converting to USB. Have you heard of any...

Sorry I had wrong size on attachment. Here's the attachment.

I'm talking about a single contrlloer board in which the Gecko drives are wired to. As well as limit switches, etc. The controller board also has inputs and output connections for such devices as...

Does anyone know where I can find a 3 axis controller board for 1200 in/oz motors? The ratings for the stepper motors I'm planning to use for the cnc machine I'm building are as follows:

Holding...

Does anyone know where I can find a controller for 3 axises, XYZ with two synchronized stepper motors, (Y axis)? One which will control 1200 in/oz motors. I am building a cnc machine for cutting,...

Does anyone know where I can find a controller for 3 axises, XYZ with two synchronized stepper motors, (Y axis)? One which will control 1200 in/oz motors. I am building a cnc machine for cutting,...