Search:

Hi guys, I have an electronic divider and want to hook it up to my lathe spindle so I can set work in the headstock and use the lathe spindle for divisions with a milling or wheel cutting attachement...

Morning,

Please fine all the 3D drawings in various formats in the link below.

https://www.dropbox.com/sh/t360qeluv3f7tjb/AAD84CK_agDN8vJzuUhq-i-Ja?dl=0

I am initially looking for a quote...

The Isel machine I recently overhauled is running really great and I recently built a dust boot for it. I've been using it for a few weeks and I need to change the bristles but it is working well....

Hi guys

I picked up a CPM 3020 machine. These apparently run off Kay or Galaad but I want to run it off Mach3. I`ve only a small amount of experience, I did fully refit a tiny TEP mill to run with...

In previous years I had an x2 and connected a stepper to the opposite end of the handle on the x axis. I programmed a pic to run a stepper motor and used this as a simple power feed.

Is this...

I've just got a second hand x3 mill and I noticed the z axis jumping! It wasn't smooth... It would move nicely down and then you could feel and physically hear it jump! The hand wheel didn't actually...

Hi all, don't post too often on here but read very frequently!

I've got a reasonable workshop and have built a small CNC machine/router, a CNC dividing head and a reprap 3d printer. All my...

Hello

Hoping someone in here could help me setup my spindle in Mach3. I`ve been happy setting up the rest of my cnc machine, but I must admit, I`m a little out of my deapth with this spindle and...

Hi, once again I appreciate your time taken to reply.

I appologise, I pinched the photo off the net and edited it - it isn`t the exact board I own. Mine is the same as the photo you have shown in...

Hello, thanks for your reply. Really helpful - I just need to clarify one thing...

When you say that you can tap into pins15,16,17 on the bottom of the board, do you mean I`ll have to expose some...

I have the blue 3 axis TB6560 drivers and I have it working OK on my small machine setup.

I would like to use Mach3 to control my spindle speed. I have built a spindle using a brushless dc motor...

Many thanks for your replies, I hadn`t joined the vectors!

http://www.raynerd.co.uk/images/wheelworked1.JPG

Hello,
I have imported a clock wheel into vcarve and selected just the outer vector (tooth profile) so not to concern itself with the crossing out and centre hole. I want to cut the wheel profile...

Hello, I recently dipped my toe into CNC by purchasing a TEP milling machine. It cost me very little and although after stripping it down and building a z axis it would have been easier to start from...

Arvidj - I have a working controller with a 18F452: Raynerd.co.uk » Blog Archive » CNC Rotary Table Final Video
and I have just blown the code to a 18F4520 . The display works just as it should but...

Hello Sprinter,

I`ve recently got myself a taig (peatol here in the UK) I want to convert it to a CNC machine but keep the manual function. I`m interested in your latest design but could I just...

Hi Guys

I`m just wondering what chuck you have all gone for for your X2 mill.

I`m thinking about the ER32 collet system - any thoughts?

Chris