Search:

thanks tom, should I write these commands in the consol?

dear tom, yes, x master z slave, y master a slave thank

[QUOTE = TomKerekes; 2341958] Ciao Dalmazio,

non capisco cosa stai chiedendo. Possibile configurazione Master / Slave ? [/ QUOTE]
dear tom, yes, x master z slave, y master a slave thank

Please could you help me. I’ve to put in parallel two line of engines. Examplíe: x with z and y with a. Which is the command that I’ve to applaid?
Thanks a lot. Dalmazio.

dear tom, with the program rs232read, can only communicate with the console kamotion that prints them in hexadecimal, and does not execute the command, how can I translate it because the axis moves...

dear tom, I'm trying to fix the kanalog, you can tell me the names of u32, u31u30, u24, u25, u26, u21, u27u18, u7, u11, I lost the document where I had noted the names, I bought a new kanalog but not...

dear tom, unfortunately also the canalog and faulty, I have already ordered a new one, regards dalmazio

HIi Tom
double value;
int ivalue;
char s[20];

stop compilation error value = chx->Dest / 180.0; // divide destination by...

BR dear tom, I need to send the display reading out of the kflop or knalog in angular degrees format via rs232 kanalog, if it is not possible the encoder inputs divided by 180 to convert them with...

dear tom, u5 and shorted, I bought on ebay u5 and u6, I try to fix it, I have already unsoldered u5 and the short circuit disappeared, I ordered u5 and u6, I try to fix it, I hope the kanalog is not...

Br tom the dsp is cc tanks dalmazio

I tried to connect a ttl encoder on the j6 connector, I think the fpga is dead, can I try to replace it?

thanks tom, okay ups, I urgently got the kflop I had in Italy,the failed kflop no longer lights up, the power supplies are correct, the leds remain off and the recovery from alarm out of time

Do you want to send the current commanded Destination divided by 180 out to your Arduino?


yes, I convert them to degrees to send them to a remote display

dear tom, I have a problem, the kflop has failed, I have already ordered a new one, can you send it as soon as possible? I have a test for next week, thanks moglianesi dalmazio

We can move two axes in degree with Kflop integrated in a Kanalog. Could you explain us and
give us the indication to reach a position in degree outside the kanalog through RS232?
Or also to...

dear tom, I use the kanalog and if active the suggested program for the rs232 stops the system, works with the programs write and read kanalog rs232, another question, it is possible to have the...

Tom, is it possible to output rs322 / 422 angular signals of rotational axes in degrees in 0/360 format? for kflop wiht canalog thanksdalmazio

Dear Sir the gamepad no work to this version his normal thanks dalmazio

thanks, I certainly do not understand anything, but with your help I hope to succeed, first thing? what kind of signal and what inputs to use, thank you

Dear Sir, I want to use an external signal, type gamepad or pulse generator, in real time and not in g-code and use kflop to control the motors in closed loop, thanks dalmazio

[QUOTE = TomKerekes; 2163902] Ciao dmoglianesi,

non capisco appieno la tua domanda. Ma sì KFLOP ha uscite Step / Dir. Vedi: Consigli
per l'impostazione passo e direzione

[/ QUOTE]

Dear sir, you can use Kflop to control two servomotors with external step dir signals

thanks Tom , now works, dalmazio

hi, I have a controller kflop ​with snapamp and differential encoder, I can not make the move dc servo motor, as I have to configure the controller? I connected the encoder j7 snapamp pin 15 16 17...