Did the 3.5 volt solder in battery change. Used wire leads and soldered in the new one then clipped the old one out
Thinking I could avoid this. Now all that comes up on the screen is on the...
Type: Posts; User: blowncoupe
Did the 3.5 volt solder in battery change. Used wire leads and soldered in the new one then clipped the old one out
Thinking I could avoid this. Now all that comes up on the screen is on the...
My v23 is missing the main menu. The one that has your files,edit,and so on. I know how to get you tool bars back by right clicking
Up in the corner and putting a check mark by the missing tool bar...
Your right RAF I went in and deselected the boundary and changed my Z to .5 witch is where my part bottom is
and it worked. My only question is why does the video tells you to select the boundary ?...
as mmoe stated you would expect the ballmill to cut below the part when you select part bottom but it still cuts about .250 shy of the bottom.
at first I started the part bottom at Z 0 when the tool...
yes I did go to the stock wizard first .I did leave the stock close though .I will try to run it with more x and y stock thanks for all
the help you guys
ok well thanks for your help
thanks for all your help
I hope this worked
OK I will give it a try
I sure can . what address do I send it to?
I just got V27 pro and my 3d tool paths don't go all the way to the bottom of the part .I have tried z rough, z finish , planer they
all leave about .250 from bottom . Z 0 is the bottom Z+1.00 is...
I'm trying to get bob -cad and my milltronics cent.5 controller to talk to each other. does anyone know
what file extension milltronics uses?
thanks
thanks guys for the input. I did find the issue.You can't have a file extension
with this machine. I left the file extension window blank in bobcad and the
machine worked fine.The weird thing is...
I went in the set up on the mill and seen cad in the menu with DXF or CDL
I set it on DXF and reposted my program in Bob-cad in DXF and it did the same thing error 302 can't read file
...
Can anyone tell me how to get my milltronics 1D to read the posts from
Bob-cad.I can post and save to a floppy but when I put the floppy I the
mill it tells me there is nothing to read error 302...
trying to get bob-cad to talk to milltronics partner 1D. I can get it to post
and save but the machine won't read the floppy.tells me there is nothing to read. I know bob-cad is saveing in a NC file...
Does anyone know of a brand and grade of insert for milling and turning
this stuff? its kicking my butt . work is in cnc machines
thanks:drowning:
The one thing I learned from threading this stuff is to use cutting oil instead
of coolent.The threads were torn and ruff with coolent but with good grade of
cutting oil looked great
the file extension that was giving me the trouble was .nc I have a cent 5 at home and a cent 6&7 at work the ones at work load fine but don't run quite
right.I got a post from bobcad for a cent 6...
hello jason
not milltronics tech suport.you guys are top notch.bobcam suport never calls back.I did what you said but still didn't work.What I did do was get rid of the
file extension and the...
with the help of allen123 we tried that. it didn't work I'm at a loss
I changed the parm. in the machine to except all dos files.changed posts
it still wont read any files
I just bought V23 bobcadcam and I can't get the mill to read a file after I post it. I tried every post processor that bobcad has on their cd and their web page yet the mill says there are no files...
has anyone had issues with older partner 1 encoders? I was hoping to find a after market co. milltronics want a arm & leg for one.I see alot on ebay for cheep but don't know enough about encoders to...
The funny thing is it worked fine today.the cw & ccw commands work
but when you use the home nothing happens.I'll check the wiring tomarrow
what do you know about encoders? sometimes when you home...
when I type in m20 in mdi or push the home button the carousel doesn't move. It will do a tool change but the pocket facing the spindle on start up
is the new home every day.If I shut the machine...
does anyone know the procedure to home the tool changer on a partner 1
I beleave its a 1992 machine.
when you comand a tool change it will put the old tool away but when the Z
tries to go up to except the new tool I get a Z excess error.There are no leds lit on the drive bords.you can reset drives...