Thanks for this upload soofle616, just jumped into CAM after about 8 months away - with my tool library gone awol through what I think was one of the updates .... this has saved me a heap of time.
Type: Posts; User: al010964
Thanks for this upload soofle616, just jumped into CAM after about 8 months away - with my tool library gone awol through what I think was one of the updates .... this has saved me a heap of time.
Hi All,
Just wondering if anyone has had any experience with swapping the manual oilers to the new type or changing to another part?
Old type - tranpartent bowl
New type - non transparent...
Agree a 100%, I don’t use flood as have the machine in my den; if I do pocketing I get to stand there with high pressure air gun -deep drilling and taping gets ‘tap magic’ on a brush. Not perfect...
+1 on smokedivers comment.
Have Pete’s pendent as well and a great improvement over the jog wheel.
Cheers,
Adrian
Know the feeling Steve, I have one that is just over 5 years ..... sitting in the 4th axis box next to my machine. Your post got me off my ass and I finally ordered some 1/2 loc-line to finish the...
Always really cool to see what everyone is working on! Unfortunately away from my shop for what will be six weeks, by the time I get home.
Spinneti - landing gear looks great do you have a build...
Hi All,
Just a shout to Michael (Sydney) for taking the time to help out a fellow maker.
You next beer is on me :)
Cheers,
Adrian
Hi All,
Just wondering if anyone in Oz has an USB V2.0 dongle they are happy to lend me to get out of a bind ..... long story short have another one coming out of the USA but it’s on a slow boat...
Done. However I will state for the record that I was advised previously in a similar thread that got deleted that it would be sorted.:stickpoke
Hi Dan,
Thanks for your response , I am sorry you think that my response was childish.
You have provided your CV in the below commentary with roles including Operator/shift formen/QC inspector...
The below is a copy from another thread, which has gone off topic.
‘When xxxx came out with his fixture plates and all of his fan boys began to slam Tosa Tool I figured "wow, this is a real...
Sounds like you are going about it the right way... which means looking for other avenues, which others will be able to comment on better than me. The only thing I would suggest is just double check...
+1 on the above.
It looks like you are leading out either vertically or at 90 degrees to the part. Depending on your CAM you might not be able to arc out, as Steve suggests ; if this is the case...
Hi Michael,
Darwin 🙂
- - - Updated - - -
Hi Michael,
Darwin 🙂
Thanks for the heads up, might see if he is coming up this way.
Cheers,
Adrian
Thanks for the heads up, might see if he is coming up this way.
Cheers,
Adrian
Looking Good !! :cool::cool:
Thanks for the update
Cheers ,
Adrian
Bump....
Any movement on making the larger pendant available?
Cheers,
Adrian
Nice work, do like the extra visibility over the tormach !
Cheers,
Adrian
Best of luck with the venture Steve ! Post some photos of your new kit when it arrives.
Cheers,
Adrian
‘’Regular mouse on right and 3d mouse on left with keyboard in center and three 25.5" monitors that can be rotated and positioned in portrait or landscape mode for full wrap around effect. I cam...
Nice work John thanks for sharing.
Cheers,
Adrian
Did the same, fresh install, but windows 7. Had the same licensing issues, which seems crazy now they have gone to a non dongle setup. Really don’t understand why they put this dependence on...
Agree partly with your sentiment- in the early days I remember reading your posts and the stuff you were doing with sprutcam, I got know where near as efficient as some of the programming you were...
Sorry can help with that one, I just removed the panel and didn’t relocate.
Cheers,
.srtian
Three good reasons why I like the full enclosure:
1) I share the space on occasion with my my good wife ..... and she isn’t a fan of sewing when chips are flying.
2) almost never wear shoes in...
Yep thanks for that have, I can see what you have done with your design. The 26020 is 8/32 and 26050 is 1/4-20 so will try the smaller ones first as will likely get more use when making smaller...
Thanks John,
Yes agree, machines will likely be a little different but will use it for the foundation.
Thanks again, and look forward to seeing how the stainless ones look.
Cheers,
.adrian
What size pit bull clamps did you go with? I will probably make the bodies out of 6061 so would use helicoils as have used them successfully in the past. Probably only need the holding pressure of...
Hi John,
Thanks for sharing, keep us posted with your progress. This is on my todo list for my 770 and would be grateful if you shared your sketches, as a starting point...... as I hate...