hi,
I have a Fanuc 10M moriseiki MV juniour.
I use cimco v6,
as i sent the program to cnc as DNC , the machine just recieves 28 lines but cimco sends all of the program.
the error SR834 BUFFER...
Type: Posts; User: hadi-nour
hi,
I have a Fanuc 10M moriseiki MV juniour.
I use cimco v6,
as i sent the program to cnc as DNC , the machine just recieves 28 lines but cimco sends all of the program.
the error SR834 BUFFER...
Hi all
I have noticed that these errors refer to servo motor direction : parameter 1879 in which the X,Y,Z parameters should be 111 or -111.
and servo motor type parameter 1874
I have solved the...
Hi
I sent the parameters to your email.
please check and tell me in case of any problem
Regards
I also have the same problem with fanuc 10M
I used to send / receive programs with cimco 6 but now i can only read programs & parameters with errors and can not send them to the CNC machine.
what...
Thanks for your comments. I have checked the program and find the problem. as you mentioned, that was a programming error with no alarm.
Regards,
I don't have an alarm, and it just does not work
I use G41 as you mentioned but it does not offset the tool as much as the tool radius.
I also set the tool diameter in D# and it had no difference
Hi all,
my Morie seiki fanuc 10 M mill does not recognize G41 & G42
is there any parameter or keeprelay that should be changed to solve the problem?
Thanks
Best Regards
Hi all,
I have a Fanuc 10M morie seiki MV juniour Mill
parameter 8000 is 0 but i can change the setting & service parameters.
could you please help me what to do to disable this porblem?
Thanks