fanuc calls the A20B-3300-0390 an "8 axis servo control module" . Nothing model specific... Is there a source to learn what is compatible with what control? I trust you, I would just like to be able...
Type: Posts; User: peterson76
fanuc calls the A20B-3300-0390 an "8 axis servo control module" . Nothing model specific... Is there a source to learn what is compatible with what control? I trust you, I would just like to be able...
Thanks memoryman,
I can also get a A17B–3300–0201 6 axis. My control is 16i-A and i have several different servo software versions including 9090 and 90A0. I believe I saw in a Fanuc service...
I have the control figured out, The only hard parts so far are figuring what software versions are needed and getting them!
The card is 8 axis
Eric
Hello all,
I would like to upgrade my mill with 16i to 8 axis. Anybody know what servo card and software I need to use?
I can get a A20B-3300-0390 8 axis card very cheap. The seller says it...
Hello John,
I have managed to round up most of them and the mill will boot up now but it is still not "right". The spindle version I have on the mill now is 9D00-****.
I have depleted all my...
Hello,
I am trying to get a rotary working on my VS50 with 16i-MA but I am having issues. The mill has the axis expansion options. Here is what I have done so far:
1. Installed drive. The...
Thank you.
I'm in Florida. Are you pretty good with Hitachi? I have many other issues.
Eric
Anyone know how to fix the directory broken error on a Hitachi Seiki VS50 with 16i-MA?
Thanks,
Eric
Ya, I called Fanuc. They will not supply any software. They will only send a guy. I cannot afford it.
I have to get it going myself or just scrap it. I can't keep paying rent to store a broken...
I have an sram backup of the machine with the newer boot program but it still shows the older version when I boot the control.
My situation is this...
I've lost everything on the mill, every...
Does anyone know if it is possible to install a newer Boot program for the 16i-MA?
My control currently has 60M3-0008 and I want to install 60M3-0009.
Thanks,
Eric
Hi everybody,
I am desperately looking for a couple files to get my Hitachi VS50 running again. Can anyone send me the following Fanuc files:
Graphic 600W
Spindle 9D0A
Servo 9090
Thank...
Hi everybody,
I am desperately looking for a couple files to get my VS50 running again. Can anyone with a 16i-MA send me the following files:
Graphic
Spindle
Servo
Thank you,
Eric
Almost have my mill back from the dead. I need a few files to get it up. Control is a 16i-ma.
Serial spindle: 9D0A-002
Servo: 9090-0010
graphic 1: 600W-001D
graphic 2: 600W-102H
And...
Hello,
I have an 850SX with rotary just installed.
The option is present, degrees are being displayed (and change if spun), parameters are set...
But the drive enable is not coming on for...
Can someone please send the A06B-6050 manual?
[email protected]
Thanks guys,
Eric
Its a Hitachi Seiki VS50 with Seicos 16M (Fanuc 16i-MA).
I have the Hitachi stuff from DMG Mori Seiki, I just need some Fanuc stuff.
Thanks,
Eric
Guys,
I need a few files to get my mill running again. I will pay for the files.
Any Fanuc guys or service techs have these files available?
Spindle: 9D0A-0002
Servo: 9090-0010
Graphic1:...
Almost have my mill back from the dead. I need a few files to get it up.
Serial spindle: 9D0A-002
Servo: 9090-0010
graphic 1: 600W-001D
graphic 2: 600W-102H
And...
Did you ever get this sorted out? I am in the same situation.
Thanks
Hello,
I am trying to get my VS50 running again, i need all the basic system files.
So far some very nice guys have supplied some but I am still looking for the rest.
This is the file list...
Hey guys,
I am zero for three on getting these files. Can anybody help? 1998-99 Hitachi VS50 16i controller. Just the NC files, not parameters, or anything specific to your machine (files from...
Hello,
If anyone is interested in turning on options in the 850SX, here is some info.
There may be a different way to do it but I come from a hardware background so I dig into hardware instead...
I have the exact same problem on my 1996 Sabre 1000 with Acramatic 850SX.
I live in florida and it turned out that humidity was the issue. The problem got progressively worse over time and now on...
TSolid,
Thanks, you would need an SRAM card, boot into the service menu and select "system data save".
You would then save all the listed files on the SRAM card.
Do you have the tools for...
Hello all,
Anybody with a ~1999 Hitachi VS50 / 16i-MA willing to give me a machine backup ( from the system service menu ) from their machine?
I do not not need parameters or anything specific...
tmbruno,
My pms's are not getting sent for some reason.
Can i PM you with my email address?
Hopefully one of the cards I am waiting on will work.
Thank you,
Eric
Correction: I guess there is a low level software allowing basic hardware access since I am seeing a menu and can access the memory socket, and buttons respond to input.
But that is as far as the...
Hey guys,
I have posted before about this mill and this problem but things have gone from bad to worse.
Last night while I was sleeping (dreaming about the day I find a Compact Flash card that...