Search:

Well better late than never for this post I believe one of the wires that go to multiple thermo sensors have broken you can disable the thermo sensors parameter until you get a new sensor so far as...

let me know how it works out for you there are other tricks but it does involve going into some parameters not so fun though

Does your Lynx have Integral spindles? if so the issue is with the spindle motors not knowing if they are both in high or low phase.

This should fix the issue,
G97
M203S0
M203S2300

This...

I posted this on the Daewoo/Doosan forum without anyone with a reply I do not use any type of Cam software if anyone could generate a simple code of radius approach in and square mill profile and...

Castrol MB50 great way lube/Bar feeder oil separation keeps the machines clean and it keeps me happy!!

Here is an example: for a O i series program that I use on a Doosan 2100MS and don't be intimidated with these machines. Doosan has the listings of the G and M codes right in the Fanuc controller...

The 8200 controller is nice I am not 100% sure if the one I use is the 8200-B model it does lack a tool library/cutting speeds and feeds conditions were you would program in your tool you want and...

Hi all I have a question in regards to making an internal square with a radius approach in and approach out I have been doing the square with no problems using the X and C axis, however I would like...

I use a 2100ms with the i series control hope this program somewhat helps.

%
O1015(1D. 17/32 OR 9/16 THRU/VAR.)
(TOOL POSITION O.K.10-10)
(1/8"-2"LG.)
(SET VAR.#519=1 FOR MANUAL LOAD OR. TO...